Having problems with your Flat Panel Televisions ?

My wireless speakers of my panasonic SA-PT860 home theatre system are not working. The receiver unit LED is always red, though it used to work on GREEN. On the main unit, (W1) flashes, which as per panasonic identifies a frequency conflict. I have tried to switch off every device that might cause the problem but all went in vain



Answers :

Hi snathan05,\015\012
\015\012Your unit is in standby mode only and does not power up because it has a problem in the power supply section. This section missing some voltages which will drive the main processor. The very common caused of this fault is the Voltage regulator IC/transistor which might be open or shorted, shorted zener diode. This is accompany of open fussible resistor. Best to check the output of each voltage regulator to narrow the job. If you don't have necessary tools and test instrument, I would advice you to send your unit to your local Panasonic Service Center.\015\012
\015\012Hope I helped you.\015\012
\015\012Have a nice day!\015\012
\015\012Thanks for using Fixya.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My wireless speakers of my panasonic SA-PT860 home theatre system are not working. The receiver unit LED is always red, though it used to work on GREEN. On the main unit, (W1) flashes, which as per panasonic identifies a frequency conflict. I have tried to switch off every device that might cause the problem but all went in vain


Hi snathan05,\015\012\015\012Your unit is in standby mode only and does not power up because it has a problem in the power supply section. This section missing some voltages which will drive the main processor. The very common caused of this fa ... Flat Panel Televisions

Panasonic viera TX-32LXD85 used to connect fine to HumaxT2hdr and Lenovo laptop via hdmi cables. Now when you switch on either units the tv switches to hdmi signal/port but no picture appears on screen. tried switching cables turning on/off in different order and resetting tv to shipping setting. Still no change.


... Flat Panel Televisions

When power supply to TV exceeds 224V the TV switch off. It then tries to switch "on" again and will do so until the power supply to TV is lower than 224V. I ran a AC DC regulater to keep power output to TV as close to 220V. Then TV plays perfect. Aventually I unplug TV and go to bed. I have tried UPS's as well. Same problem. I think power supply unit in TV is damaged due to power surges. I replaced this 2 year old TV with a new one. Costly excercise. I still belive this TV can be fixed.


If a power supply is what you want, they are available all over the world, just use the internet like you did tonight and use Google, type in your tv make and model and power supply and you will find them. Parts are really hard to come by now the Qua ... Flat Panel Televisions

I purchased a Panasonic TX - L42USB today; everything was working fine until I put the memory stick in. The picture frooze and after switching it off then on the light flashes green then the tv switches itself on and off a few times then the screen has no picture. The remote is not doing anything and when it was fist switched back on a message came up saying 'trying to retrieve data' but I am unable to select the USB option. Any suggestions?


... Panasonic Viera TX-32LX70 32 in. LCD TV

I have just bought the Panasonic DMR-EX99VEBK 250GB HDD DVD/VHS Recorder with Freeview+ and when I try to set it up , it doesn't seem to communicate with the television Additionally the unit screen displays please wait. After several minutes the screen displays HDDERR and the dvd tray opens I have tried this several times and there is no evidence of auto setup Hope you can help


... Panasonic Flat Panel Televisions

Hi I purchased a Panasonic Viera Plasma TV approximately 15 months ago. The model is a TXP 42 G10B. Two days ago we lost the picture and sound i.e basically it will not switch on despite trying to do this maually and switching on and off at the mains. All we get is a red right which flickers on and off for a few seconds at a time. Fortunately it is still under warrantly. However, I have heard that this type of problem is a common one and that the TV cannot be repaired. If that is the


Hello\015\012This type of failure are very rare cases to Panasonic Viera. Anyway, it have so in your case. The video DAC damage is the case. A board replacement should be needed. You have warranty, and get it repaired by the authorised serv ... Panasonic Flat Panel Televisions

Panasonic PT-61LCX65 turned off while I was watching TV. Won't come back on. "Lamp" light blinks once every 5 seconds. Tried turning it on several times per the manual instructions--no change. Removed lamp and saw no obvious evidence of lamp burnout. TV is 6 years old with original lamp. Any suggestions? Thanks!


Tv projection lamp life are over. Wow 6 years with the original lamp,what u want it last for ever.Replaced the tv projection lamp,will solved the problems. ... Panasonic PT-61LCX65 61" Rear Projection HDTV

Panasonic tx-p50xt50b Only had this tv 6 months keeps switching off & not coming back on, i somtimes take out the plug (reset) this only works somtimes. i also have tried the lead on another tv it works fine i could take it back to currys but if its somthing i cuold do please help!!


Apparently there is an internal power supply problem that is causing your TV to shut down unpredictably ... Flat Panel Televisions

I have a Panasonic Viera TH-42PZ77U, when I try to power it up it wll click as if it was going start and about 2 sec. later it ckicks again and the red light by the power switch flashes


Something inside has failed.\015\012\015\012The flashing is a code for the repair engineer to tell him/her what is wrong.\015\012\015\012\015\012---\015\012\015\012Please dont forget to vote if you liked my answer ... Panasonic Viera TH-42PZ80U Plasma TV

Hi there I have recently bought a Panasonic Viera 32", I have installed the Sky Box and Bush VCR/DVD Recorder Combi correctly but when I turn onto AV2 and switch on the DVD player the screen comes on but is bright green! I have tried all suitable tuning methods and have been through the installtions time and again and checked all cabling but it will not change, it can't be the Bush Combi as it worked perfectly with my previous Samsung set, this is really frustrating, I can't see that it is a fau


... Panasonic TH-37PX50U 37 in. HD-Ready Plasma Television

Picture problems My 4 year-old Panasonic VIERA TX-32LZD80 32 in. LCD TV is becoming unwatchable. The main problem is the picture keeps distorting and jumping along with a 'zip' sound or distortion to the sound at the same time. The distortions are horizontal and getting so bad I switch it off and give up trying to watch. I had a similar problem quite a while ago, then it got better and now its back - but much worse. Some channels just produce the odd small distortion,whilst others are unwatc


... Panasonic VIERA TX-32LZD80 32 in. LCD TV TV/HD Combo

TV staying on one channel only. Tried info, menu, mute power off. When it turned back on it showed the menu and option to reset, as per advice i have read on here. However the select / ok button on the remote does not seem to select the option, from what i read it is then supposed to switch itself off, when turned back on, it should then allow me to plug and play and start from the beginning as i did when it was first purchased. But it does not? :0( any advise welcome. Thanks in advance


Try to enter auto scan.. ... Flat Panel Televisions

Panasonic 58 TV powered off while watching and would not turn back on via the remote or the switch on the unit. Now will not turn on at all.


... Panasonic Viera TH-58PZ700U TV

Hi. Hope you can help.. About an hour ago I tried to switch on the tv. the standby light was on but when I tried to switch it on the light just disappeared as if all the power had gone. About 5 mins later the red light comes back on. This just keeps happening when ever I try to switch it on. Yours Gratefully Adam


Sounds as if the power supply has gone. Usually when that happens with no other problems piror it is the capactors in the power supply.If your tech savy you could look at the caps to see if they are swelling.If some are you need to replace them.My 52 ... LG 37LC7D 37 in. LCD HDTV

I have a Hitachi plasma model# 55hdt79 that went black out. No display at all. Sound is ok. We checked the power supply unit and found out that 90v output is missing. We changed the power supply unit assuming that this is the cause, but still the 90v is missing. All the LED lights on in sequence and switch off after loading when I switch on the main power switch. This means no error. The TV can be switch on and off by the remote. Which board is probably the cause of this issue?


It sounds like the transformer on board has gone out (not the one in the power supply) and is no longer charging the panel. the board internally that holds the transformer will have a model number on it, any decent repair facility should allow you to ... Hitachi 55HDS69 55 in. Plasma Television

I have a Mitsubishi WS-55909 projection TV. There was a power outage and when the power came back on, the TV won.t turn back on again. There is this light (Timer) that keeps on blinking on the front panel of the TV. I tried unplugging the Unit and waited for about 15 to 20 minutes before turning it back on , still won't work. I tried using the original remote for the TV to try to turn the power on, still doesn't work. There is a reset button beside the timer light, and I tried to reset the unit


Unplug,replug the tv back like 24 hrs later.That the whole tv is resetting itself everythings.Tv now should be working again.If still have the same problems,than ur tv DM power supply board is have dying parts,must repair the tv DM power supply board ... Mitsubishi Projection Televisions

Hi I have a Sony KLV-46W550A, I have just tried to switch it on from the standby mode and it now switches itself off immediately and the standby light begins to flash, 13 times between each 2 second break. I have switched it off at the mains and tried again but with the same ocurrence each time. Many thanks for your help


... Sony BRAVIA KLV-40U100M 40 in. HD-Ready LCD Television

I have just re-installed my pdp5071 after it being in storage for a few years.. the unit will not power up . at plug-in several clicks at upper left rear of unit ( click - stand by red light on-off, pause then click blue power light on, click blue power light out, pause click, click ) unit then is dead .. i have tried the unplug reset operation several hundered times same result. i have tried the mechanical power button a few hunderd times - randomely at plug-in i get a single click and red stan


There are two power buttons on this TV. One on the lower left front and one on the right side. make sure they are both on. During storage it may have deactivated both of them. ... Pioneer PDP-5071HD 50 in. Plasma HDTV

50hm66 There is a new bulb in the TV, and it is working. However, it takes several tries to light the lamp before it will start up. If, after I turn the unit off, and come back to it in a couple hours, it will not start at all, and I just keep getting the yellow blinking light over and over, as it tries to start up. Eventually I will get the red blink with solid yellow. If I wait a day, the unit will start again after a couple tries.


Some possible reasons include: New lamp is generic and or has a issue----excessive dust or dirt inside the unit on fans etc.Some of these units had a feature in the menu for quick on where lamp is lit at low level all the time---this shorten ... Toshiba 50HM66 52" Television

I have a Panasonic TH50PZ77U plasma. (1) recently the unit would power off, without warning. (2) The power light blinked several times two nights ago, but finally came on. (3) Last night, no power light on the front of the unit, and it will not turn on. The unit is plugged into a surge protector and all other components plugged in are operating correctly. I have read through several forums on similar Panasonic models, and a "power supply" failure seems to be way to common.


Its probably the main filter capacitor thats gone on the power supply, (sorry for mentioning power supply again but it is actually a power supply problem) If you are good at soldering then you can replace yourself, Google Panasonic capacitors and th ... Panasonic TH-50PZ77U 50" Class Plasma HDTV

Hi, I switched off my Samsung TV last night as usual, and when I tried to switch it on this evening it wouldn't switch on.I tried unplugging it and turning it on, but the red power light on the b


I see so many here with no sound/no picture issues: ISSUES: 1. IF sound main fuse/s are good. 2. If no power or standby check main fuse, standby power supply and any signs of damage you can see---burnt parts etc. 3. almost ... Samsung HP-R5052 50 in. Plasma HDTV

My Dual 32" lcd tv, model number dlcd3221 will not switch on, i have tried the fuse and its ok, i switched it off before going o bed and when i tried to switch it on when i got up, it wouldn't come on and it seems like there is no power going through it as not even the stand by light comes on


... Flat Panel Televisions

My panasonic 1080i tv will flash green for approx 100 pulses then switch to red


A model number might be helpful here as a lot of different sets with this name with different issues. ... Panasonic Projection Televisions

The Samsung HCM4215 Rear Projection TV was playing and all of a sudden the Picture disappeared but the audio kept on. Then I switched off the TV and tried to switch it on but the TV is not turning on. The tiny Timer light keeps on blinking and thats it. I have tried unpluging the TV from power for one week and then plugged it back t power, but still the same Timer light keeps on Blinking and won't let me do anything with the TV. By talking to friends it seems the DLP lamp has blown out but


First I need to clarify your tv. Your tv is not a DLP. It is a standard 3 CRT rear projection. So there is no Lamp/bulb to replace like you would find in a DLP. \015\012\015\012As for your problem. I would suspect a convergence failu ... Samsung HCM4215W 42" Rear Projection Television

My thomson 20LB020S4 tv will try to switch on from standby, so times it will but i only get a picture for about 30 sec. other time it doesn't finish booting up. If and when i do get a picture when it switches off i still receive sound. I have tried a factory reset.


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0944 seconds