Suggested Questions/Answers :
It is recommended you read all this kind of situations
Binary File Detecting... error on my TV. I have a Devant 32'. We were watching a DVD through HDMI connecxtion when we suddenly lost picture and it displayed No Signal on screen. I checked all connections are okay and I did the power reset and still not working. And now, everytime I turn my TV on it shows the error message Binary File Detecting.
Flat Panel Televisions
I have a apex 32-inch tv model (AT3208S), This tv was connect to a converter box, the other day electric power went out in our area for about 8 mins or less, once the power was back on the tv screen was blue and have remain this way. I have disconnect, scan, unhook, chg to 3/4. I went to Best Buy, came home a connect, with the same problem. I called Best Buy Tec support, they tried different things, reset, unplug, disconnect ect, same problem the tv screen still blue. The tv is working and the c
OK, I have one of these TVs, and here's a thought: There's nothing wrong with the TV nor with the cable converter box. Please bear with me. Since I don't know how much you may know about TVs in general and this one in particular, I'm going to assu ...
Flat Panel Televisions
Database empty Sharp Aquos LC-42XD1EA showing database empty, even after constantly retuning. Analogue signal supplied by powered distribution system in house loft, and all televisions supplied by this (including other flat screens) work fine. Tried it on other ariel leads in different rooms with same result. Tried Factory Reset function, and still no change. It will play from DVD recorder, and have tried connecting to old freeview box (it gets signal and displays picture but is very gray). Any
Sharp Flat Panel Televisions
I have a Mitsubishi WS-55909 projection TV. There was a power outage and when the power came back on, the TV won.t turn back on again. There is this light (Timer) that keeps on blinking on the front panel of the TV. I tried unplugging the Unit and waited for about 15 to 20 minutes before turning it back on , still won't work. I tried using the original remote for the TV to try to turn the power on, still doesn't work. There is a reset button beside the timer light, and I tried to reset the unit
Unplug,replug the tv back like 24 hrs later.That the whole tv is resetting itself everythings.Tv now should be working again.If still have the same problems,than ur tv DM power supply board is have dying parts,must repair the tv DM power supply board ...
Mitsubishi Projection Televisions
TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help
Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ...
Hitachi 57F500 57" Rear Projection HDTV-Ready Television
I have a LC-60LE64OU LED TV - connected it and programmed the Direct TV remote to turn off the TV. Everything seems to work fine until you turn off the TV. The Direct TV receiver resets every time that the TV is turned off (the Direct TV receiver shuts off as well). Even if I use the TV remote and only power off the TV, the Direct TV receiver powers off and then resets when I turn the TV back on (meaning that it takes at least 10 minutes to cycle through every time the TV is turned on). Plea
Sharp LC-60LE640U Aquos 60" Class 1080p Edge-Lit LED HDTV with 120Hz,
The Timer indicator on the front of the TV is continuously blinking green. I have made several attempts to fix this by pressing the System Reset button and held it for up to 30 seconds at a time. Each time I release the System Reset button, a few seconds later the Timer indicator starts flashing again. I have also totally disconnected the TV from power for up to 15 minutes but as soon as I connect it back to power the Timer light starts flashing again.
I cannot locate my owners manual for
Hi,Let me know model number of your Mitsubishi tv to provide you helpful info about problem and manual pdf file.Thanks. ...
Flat Panel Televisions
My JVC LT-26X575 will not power on. Opened it up checked all connections and got it to power on. Screwed it closed tried again and again no power. Replaced power board tested with tv still open. First try powered right up. Each successive try took longer to power up. After about 4 tries would not turn on at all. Suggestions please.
JVC LT-26X575 26 in. LCD HDTV
Problem with TH-C50FD18:Gives off 2 blinks I replaced the D-board and the A-board to no avail. The power trips the moment the 15Volts ON occurs to send 15volt power to SS, D-board, A-board and SC-board. I found no short on this 15Volts line that is switched by the MC701 Power MICOM Processor. It looks like a 15Volt error is detected, nonetheless.That's why it always reverts to standby mode. Could this be a 15volts power regulation problem? (I suspected the affected unit could be the standby pow
Panasonic VIERA TH-C50FD18 50 in. Plasma HDTV
No Power to the TV. I have unplugged it, tried a reset, and tried a different power cord and still no power. The Vizio emblem does not even light up at all.
Check the power source?Yes.Tv have a dead power supply board.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement. ...
Flat Panel Televisions
I have a Hitachi plasma model# 55hdt79 that went black out. No display at all. Sound is ok. We checked the power supply unit and found out that 90v output is missing. We changed the power supply unit assuming that this is the cause, but still the 90v is missing. All the LED lights on in sequence and switch off after loading when I switch on the main power switch. This means no error. The TV can be switch on and off by the remote. Which board is probably the cause of this issue?
It sounds like the transformer on board has gone out (not the one in the power supply) and is no longer charging the panel. the board internally that holds the transformer will have a model number on it, any decent repair facility should allow you to ...
Hitachi 55HDS69 55 in. Plasma Television
I have an RCA L32WD22 that has picture but no sound. It wasnt powering on so I changed some capacitors on the power board and now it powers on fine but no sound, so I ordered a new sound board and still no sound, all connections are snug, what could this be??
Make sure your power supply outputs are all within tolerance. Second verify that mute isn't turned on. Next, check and see if your model gives you the option to turn off the internal audio. Some sets give you this option for those who want to use sur ...
RCA L32WD22 32 in. LCD HDTV
I have no power on my Hitachi model # P42h401 Serial # V7jo77613 NO POWER, I changed the power cord and still nothing. I do not see a reset button. Help !!
Hitachi 42HDS69 42 in. Plasma Television
My Sharp Aquos turned off by itself and doesn't want to turn on. Both power and OPC lights blink green.I tried to reset my tv by holding power button and also down volume and up channel buttons. I only got the power light on but the screen was still black. I read that screen with letter 'k' should come out, but didn't. How to fix it?
That procedure was for a full reboot, not the case here. The blinking signals a hardware defect - if it's continuous it signals that the power source has been shut down in emergency mode because another part inside the tv has failed and now it acts a ...
Sharp AQUOS LC-42D85U 42 in. LCD TV
My toshiba 50hpx95 has a steady blinking red light, it has no pauses or breaks to recite a code, just steady blinking. I had it in the shop and they said the power board needed replaced, so i replaced it and still get the same code. Is there a trap reset, or other mode of reset that i am not finding in the "service" manual, or was the problem misdiagnosed by my repairman. I cant even do a boot via service code thru the remote. is there a way to do a soft boot under low voltage so the chip can gi
This tv have a Tuner signal board it is also dead too,this problems happen sometimes,the power supply board dies,but sometimes the Tuner signal board take power surges from the power supply board itself than kiill the tv Tuner signal board too.Try we ...
Toshiba 50HPX95 50 in. Plasma HDTV
Need help with power on TV; All connected but still no power
I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ...
Vizio E371VL 37 Class LCD HDTV - 1080p, 1920 x 1080, 60Hz, 100000:1, 6
I connected my Polaroid TDA-3211C to my laptop, and before I could switch to dual display the TV said no video powering down. After that I can not get it to power up. Is there a reset button someplace? I tried unplugging for a few minutes no help.
Try hitting the INPUT button on your TV or your remote. More than likely it is on, it is simply not showing a picture. Try switching INPUT to the TV selection. ...
Polaroid TDA-03211C 32 in. LCD HDTV
I have a Samsung LN40A530P1FXZA. It will not power up. I get 2blinks followed by short quick blink and then it repeats itself. I have replaced the power supply board and also the main board, and it still will not work. Does anyone have any idea as to what is going on with this tv? I wish I had an error code book for this tv, but I do not. The only thing I have not replaced is the TCon board. Need someone's help.
Try to download the manual on www.retrevo.com to see the error code for sure..Before you decided to replace t-con board please refer to the manual first,,but there is the possibility that t-con was faulty.Hope it helps..don't forget t ...
Samsung LN40A530 40 in. LCD TV
Using a Toshiba RD-XV48DTKB unit with a variety of DVD+RW discs. Frequently getting error message Cannot record on this disc
E 3 28031100 when trying to reuse discs. Tried deleting files and also formatting disc still getting error message. Any ideas?
Toshiba Flat Panel Televisions
Just like the owner of the Bush VCR, I have a Sony VCR which also keeps reverting back to 27th March at some point during the day. I keep resetting the date but it still reverts back to the BST change-over date. I've tried leaving the machine unplugged all day but the error still happened. Is there anything which I can do to stop this?
Many thanks, Sarah
Hello\015\012Waht is the model number of your Sony VCR? Inform me about it by Fixya. OK. ...
Flat Panel Televisions
My Thomson DTI 6021-25 DVR is constantly displaying the following error message when I try to access my library or even turn off the box:
"Your hard disk drive is not yet ready. It will be available shortly."
I've tried turning it off at the mains overnight, resetting it by switching off at the mains and pressing power for 10 secs when turning back on, and resetting it by switching off at the mains and pressing menu for 10 secs when turning back on.
Nothing has worked. In the help setti
Flat Panel Televisions
We purchased a Vizio LED Razor model #VM230XVT on 1/4/11 and it worked fine till this past weeked. Now when we turn the power on, all we get is the Vizio screen on the TV and will not connect to the channels. I've tried everything to get past the "Vizio screen" including unplugging the power fow awhile and still no luck. I brought in another tv and hooked it up to the same source and everything worked fine on the other tv. I took our new tv to another source and the same thing occurs, just the l
Vizio Flat Panel Televisions