Having problems with your Flat Panel Televisions ?

My LG Flatron M2262D, about six months old, stopped working with the on screen message 'check signal cable'. I checked it by using it on another set, and it is perfect. Any ideas?



Answers :

Check out the menu used to manage your inputs. It sounds like the TV is looking for an input in the wrong location. The signal may be coming in on HDMI port 1 for instance but the TV is monitoring and expecting the signal to be on HDMI port 2.

If this does not work or you need help finding the settings, post back and I will see what I can do.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My LG Flatron M2262D, about six months old, stopped working with the on screen message 'check signal cable'. I checked it by using it on another set, and it is perfect. Any ideas?


Check out the menu used to manage your inputs. It sounds like the TV is looking for an input in the wrong location. The signal may be coming in on HDMI port 1 for instance but the TV is monitoring and expecting the signal to be on HDMI port 2. ... Flat Panel Televisions

Viewsonic n3290w-au Initially digital audio and video were out of synch, and epg was showing no information for all channels. Ran the auto tuner again and it won't find digital channels at all. Analogue is fine. Have checked cable from tv all the way back to antenna on roof, can't see any problems. What can I check next? Trying to get hold of another tv to check if signal from antenna is okay. Haven't tried a different fly lead, but if analogue reception is perfect then surely the cable is fi


... Flat Panel Televisions

Hi, my Phillips was hooked up and working fine directly to the DISH receiver using the HDMI 1. I moved and had to put the DISH receiver in another room and ran a coax cable to where the TV is now using the ANT in spot. I select TV as the source and choose channel 60 and no signal. I hooked up another TV and it works OK. Any ideas?


Hey, I'm Seth. I work as a sub contractor for dish network. I am picking up that your problems are on TV 2? If so, you will need to go into the menu on the TV itself and look for, "channel scan" or "auto memory". Run a scan. If there are no channe ... Philips 42PFL5332D 42 in. LCD Television

Analog Audio Out signal has very high distortion. Signal wanes in and out, wanders from one channel to another, and develops high static. This happens when Audio Out is configured for Fixed Output. When configured for Variable Output, the signal is perfect. Output is being used with Sennheiser RS120 wireless headphone set.


The problem is more likely to be with the wireless headphone set rather than the TV. It makes no sense that the signal changes channels. The only difference betweent he fixed and variable output is whether or not the volume changes the output signa ... Flat Panel Televisions

Hi! I have a Sharp LC-37D7U and my cable company just started switching to digital at the rate of 20 or so channels per month. I was able to receive analog cable or digital cable through my analog cable receptacle on the TV, but only one or the other. So I put a signal splitter on the cable coming into the house and ran one line to each input and then it worked perfectly. I turned off the set and went to bed. Today I get no digital signal, only the signals from the remaining analog channels.


No it's not your TV set maybe you're cable company is not feeding the digital signal or having technical adjustment/problem you can inquire from them about the digital signal they are providing...and let me know it so we can proceed to other steps.. ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

LG 37LC2D-EC My Tv has suddenly started to flick between a black screen and picture after it has been on for approx an hour. I have also had a message of "This display does not support HDCP". Does anyone have any idea whats happened? The HDMI cable port is connected to Sky+HD box and I have eliminated fault of HDMI cable as it works perfectly on another TV. I have eliminated Sky+HD box as it works perfectly on another TV. Could an over air/sky/playstation update have messed up the TV?


It sounds like the TV is having sync issues with your Sky+HD box. HDCP is the "High-bandwidth Digital Content Protection" that is used between components. It requires a sync between the devices to ensure that you are not trying to "steal" the video ... LG 37LC2D Television

After 5 yrs.of excellent performance, my Toshiba 27AF45 no longer receives a signal through the Comcast Motorola DVR when I use the TV/Video button on the Toshiba remote control (CT-847) to switch between Video1, Video2 and Video3. However, it plays DVD's on the ColorStream setting and shows up to 81 channels on the TV (non-cable antenna) setting. This problem started several days ago after some power outages in my home. At first, the three cable settings (Video1, 2, and 3) started going out int


Hi,Do you get sound in Video-1, 2 and 3 while tv does not show picture in these inputs?Does tv show input display on its screen and it gets change when you select next input?I do have service manual/ schematics of this tv that has a ... Toshiba 27AF45 27" TV

I have an LG 26LZ5RV TV. I have connected it from the RF output of my Sky+ box (using a coaxial cable) to the "Ant In" socket at the back of the TV. The RF output on the Sky box is set to Channel 35 and the power is on. I know that the output is working, as I have tested it on an old portable TV with manual tuning. My problem is that I cannot get my LG TV to tune in to the signal, using either auto or manual tuning. I have used System "I" and tried setting the Channel to 35 then searching b


... LG Flat Panel Televisions

I have a Digitor 51cm tv Model G2100 which has had little use over the last two or three years we have had it (at a bach, so only used occasionally). It has started switching itself off at random intervals while watching it. I have checked the timer setting menu to see if anything has accidentally been set but that is showing 0 for all settings. Any ideas please?


See if the manufactur has a bios flash and download it save it on a usb drive plug in in turn on your tv run setup and do updates ... Flat Panel Televisions

Helo, I have problem with HDMI on SONY KDL 26U2000. I bought digital satelite complette with HDMI. I connected it to TV. But video and audio signall is sometimes shortly breaking. More times on HD programs. My service engiener checked cables - all are OK. He checked satelite signall - all are OK He checked satelite complete with another HD TV (Philips, LG, Samsung...) in his company. HDMI on satelite complette worked correctly. I would ask you about help. Thank


Sony's can be picky about HDMI.Check for software update that addresses HDMI issues.Contact Sony for software. ! 800 SONY USA ... Flat Panel Televisions

Why do i not get a signal form my Technicika STBHDIS2010 set-top box to my Bush LCD32TV022HD TV using the HDMI cable?


... Flat Panel Televisions

I purchased a used LG 2006 32lx4dc flat screen TV from a hotel. When I turn it on it says no signal and I cannot access the installer menu it was set to be run on lodgenet cable system what can i do t


... Flat Panel Televisions

I get a weak or no signal message on my new Samsung plasma. I'm using coaxial to my cable box. The cable works fine because I can see the vcr when it plays. I have it set to cable on the right channel for my area (4).


In this case, your VCR becomes the cable channels tuning device for your TV, the better connection should be from your cable box output to your antenna/cable TV input with the coaxial cable, surely, your TV has a better cable tuner than your VCR, to ... Flat Panel Televisions

No Signal Watched a DVD, when we switched back to watch TV there was no picture and it said no signal. I tried another TV to make sure the problem was not the antenea or the cable. All checked out fine. It did this once before and we found all the stations were one point off, for example 10.1 was now 10.2. We manually restored all stations and all has been well until now. I have tried many things and I can not get a picture back. In diagnostics it says my signal strength is zero. Thank you, Greg


Have you checked on all inputs including the rear audio and video jacks? ... Sony KDF-50E2000 50" HDTV

Toshiba 26AV500U This is being used as a 2nd set connected to a DishNetwork receiver. The set must be tuned to channel 73 to receive the signal, and no matter what I try the TV will not recognize 73 as a channel. I am at a loss at how to force the TV to tune to channel 73. Thanks for any ideas!


Tries tv unplug,replug it back like about an hour later.For forcing the tv do a resetting itself back to the factory setting.The tv now should be recognizing channel 73. ... Toshiba 26AV500U 26 in. LCD HDTV

Sharp/autocontrolsignal When using a hdmi cable on my new Sharp Aquos LC60c6400u I get a black screen no sound and a signal saying recieving auto control signal now about every minute does any one have a idea sharp says they have never heard of this well I now know this is BS


... Sharp Flat Panel Televisions

I have an LG 42LS3450 TV and when I use a coaxial cable to connect my TV to my outdoor cable all I get is black and white words (clearly) on a noisy and snowy Black and white background followed by check your internet connection. We have an over the air digital TV signal in our town. What have I done wrong?.


... LG Flat Panel Televisions

No picture Picture instantly gone when accidentally pressing two or more remote buttons simultaneously. Screen does display remote commands but there is no indication of a broadcast signal. TV is hooked up to cable. Cable service is normal on another set.


Tried to reset the tv. ... Standard (CRT) Televisions

Loss Color Shut down and unplugged TV and moved it out of room to refurbish room. Weeks later when I turned it back on all color was gone. But when tickering with the picture set the screen had color. Using RCA inputs. Other TV connected to the same cable has color so its not the box or cable. Any ideas?on from experts


I get that there is no Chroma on something but not sure in what mode or source you are speaking about. Sometimes people have trouble due to a setting being wrong or they use a really cheap video cable which can strip the higher frequency Chroma signa ... LG 42 42PT350 42 Plasma TV

I am tire of cable and want to use an antenna, I have hooked an antenna to the tv checked the hook up and it is secure, but am getting no signal...I have been trying to find a place to change from cable to tv via my remote but not haviing any luck...please help


After u hook up the antenna source like a digital or a roof antena to the tv.Used ur remote go into the tv menu.Goto SETUP,go down to CH.Pick AIR enter and scan for free air DTV channels. ... LG 32LG30 32 in. LCD HDTV

When i plugged my hdmi cable from my cable box to hdmi #4, it doesnt seem to receive any signal. the screen stays black. however, when i use the hdmi #3, it works perfectly fine. could it be that the port itself is defective? and if it is in deed a malfunction, what should i do next?


The fact that port 3 works where as port 4 does not implies that the HDMI port is defective. Samsung offers a 1 year / 12 month standard warranty, and some of higher model TV's have a 3yr / 36 month warr ... Samsung Flat Panel Televisions

I plugged this TV into a new cable box (digital signal, not HD), and the picture now does not fill the screen. Previously, I had another TV (different brand, same tyoe and age) plugged into the same cable box, and never had a problem. Is there a way a) to adjust the picture to fill the screen without using the zoom feature, or b) if not, is there a way to make the zoom feature permanent so I don't have to activate it every time I turn on the TV?


... Samsung TXM2756 27" TV

Upon my return from being out of town yesterday, when I turned on the Phillips 50PF9830A flat screen TV (circa 2005, but has worked perfectly all this time), the settings MENU popped onto the screen, and will not go away. The TV is connected to a Comcast cable box and BOSE surround sound system. The only way to move through the MENU screen (with all the settings options) is to use the original Phillips remote. But, there is NO way to get the menu to disappear from the screen. If you navigate


... Philips 50PF9830A 50 in. Plasma HDTV

I have a cable running from my set top box to another tv. Although i have a good picture there is not enough volume on the sound. It has worked perfectly well until I had to dismantle everything . I have a video recorder and a DVD attached. they are both working perfectly well.


Hello,\012\012This is not how you explain your problems to others. It should be precise. In this case, you could have said that you connected the cable between the RF out put of set-top box and RF input TV. Or Audio/video output of set-t ... Sharp 25N-M100 25" TV

Hi our tv just won't turn on any ideas? We have pluged it into another power source and checked the cable . the cable is fine. thanks


If it does not turn on then it is usually due to a component level failure on one of the boards. Does the LED at the front blink or just stay on? Does it make a clicking noise like its trying to turn on when you press the power button on your remote? ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1668 seconds