Having problems with your Flat Panel Televisions ?

Will not power up manually or with remote. Re-set button only produces several clicking sounds and then a similar start up sound, but does not turn on. I'm pretty handy at fixing things and have already disassembled the split cabinet. I know others have experienced the same problem, but I have yet to see any solutions. I would much rather purchase the part needed and replace it myself. Look forward to your assistance, Thanks, Avery



Answers :

The very first option is to check all your power supply capacitors. They are know as electrolytic capacitors and look like small cans with legs. You will need an ESR meter to find the bad capacitors. Nearly all repairs can be done on this level. Be sure you use high temperature capacitors of same voltage or more and the microfarads must be the same. High temperature would be 105 degrees and sometimes 125 degrees. Thanks for asking.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Will not power up manually or with remote. Re-set button only produces several clicking sounds and then a similar start up sound, but does not turn on. I'm pretty handy at fixing things and have already disassembled the split cabinet. I know others have experienced the same problem, but I have yet to see any solutions. I would much rather purchase the part needed and replace it myself. Look forward to your assistance, Thanks, Avery


The very first option is to check all your power supply capacitors. They are know as electrolytic capacitors and look like small cans with legs. You will need an ESR meter to find the bad capacitors. Nearly all repairs can be done on this level. Be s ... Flat Panel Televisions

What's your problem?i have mitsubishi hd-4001 controller input box and it don't give any display to the tv even if i can see the power led is on ...i know that


Box could need to be rebooted--unplug power for a while and then power back or BOX IS BAD. ... Projection Televisions

On my RCA HD61LPW42 TV. I heard a short buzzing sound then a loud pop. I'm sure the pop was the bulb cracking (I checked) but I don't know what the buzzing was. I replaced the bulb about 18 months ago and the previous owner replaced the color wheel and had that triangle shadow problem fixed. Any way to check the color wheel to see if that's the problem? Thanks


The buzzing sound you hear is the spark gap on the ballast circuit. It's what fires the lamp at startup. Perfectly normal. \012\012Bill W\012integrityhomeworx.com ... RCA HD61LPW42 61" Rear Projection HDTV

Hi! I've had this tv. for about a year and a half now,and really enjoyed it but now, in the last couple of weeks i'm experiencing alot of small white dots appairing and remaining stationary on the screen. I live in the Bahamas where there is no authorise repair service for mitsubishi tv. I would like to know how to fix this problem and where I can purchase the parts to solve this problem


Www.tradebit.com/tagworld.php/wd-73735+service+manual ... Mitsubishi WD-73735 Television

My name is David and the problem with my TV is that it turns on yet it doesn't display anything. I can see the screen trying to become active yet no picture appears regardless of which input I use. If the fix is a matter of changing out some chip or board I would like to do it myself David


It sounds like the lamp might be bad. The lamp lights up the screen from behind, so without the light you can see shapes moving but they are very dark. ... Sony KDL-46XBR4 46 in. LCD Television

Hi, I have searched all over internet and I think you are the only one who may exactly know whats the problem. I have a Toshiba Regza 37" which has no picture but sounds works perfect. The thing is if you really focus the picture is there but its too dull and dark to see it properly. Ive heard something about switching T-Con board.. please let me know which one of the boards is that(any sign or specific connection?) and where can I buy one? Thank you very much and best regards kamran


If you can see an image and it's OK - no distortions or corruption - then it's not an image problem, it's a backlighting problem. This means that the faulty part is not the T-con or any other board that works on the image, it's the inverter - the bo ... Flat Panel Televisions

My emerson hdtv has fading problem in upper right hand corner. The colors are fading to white, seems to be three white lights shining down from upper plastic rim for tv face. I can see the horizontal lines from about center to right edge and the same going vertically. So, 25% of screen is fading to white. Cannot find any help from menu options on remote. Anyone, know how to fix this? I am using the tv as a monitor for my computer, it is on the PC Setting.


If you notice the same problem with different input devices, the TV needs servicing. ... Flat Panel Televisions

I have 8 flashes on my Panasonic TCP60S30 - 60" Plasma.. Does anyone know what this problem is or how to fix it? I heard a big bang then screen went black, now I keep seeing 8 red light flashes.


8 blinks Driver SOS 3 SS Board (SS energy recovery circuit). This is the fault. Can you follow? Just check this site, and see whether it help you. It ha ... Panasonic TCP60S30 Plasma TV

Hi, My name is Cristina Muller, I livein Trinidad. I bought a Akai LCT3285TA three years ago and now suddenly since a week ago when I turn on the TV I see the hair in blue and some backgrounds in pink, I tried to move the brightness and contrast and hue. When the blue on the hair or around the people disappear the colors are no more bright as I have to put the brightness almost at 100% Do you know how to solve the problem ? thank you very much for your assistance


I'm assuming that you have tried to cure the tv by reseting it from the menu and it didn't helped.The symptoms you describe indicate that the image processor no longer decodes the colors correctly. Since it's glued on the motherboard it means t ... Akai LCT3285TA 32 in. LCD Television

The power light keeps flashing on and off. I know it is a power supply problem but can not see any capasitors bad (by site). What s next? Thanks--------- Les....


... Emerson EWL2005 20 in. LCD Television

We are experiencing little while dots on our HD television screen. We do not see that particular problem addressed under troubleshooting in our owner's manual. What would cause this?


Your dlp chip is bad try to find a new dmd board board with the dlp chip in it. just put your model number on ebay ... Mitsubishi Projection Televisions

Speakers volume When the volume is at a higher setting, the sound will suddenly drop in volume for a long or short period of time depending then suddenly go back to the setting it was at then drop down again. It is very consistant and happens every time we use it. I don't know if they are blown or its something with the wiring. I opened it up and cant seem to see the problem. We got it used from our neighbors without a manuel. So I am stuck. HELP!


... Mitsubishi VS-45603 45" Rear Projection Television

HI; This is Mike , I have a plasma tv about 6 years old and recently I see ghosting from time to time or should I say every 10 to 15 seconds. I've tried to re-connect all the cables but it still does the same thing. Could you let me know what is the problem please?


... LG RU-42PX11 42 in. EDTV-Ready Plasma Television

My mitsubishi ws-65513 picture makes a pop noise then goes out with the sound but can still see video source info on corner of screen. then i have to turn tv off wait a couple of seconds then back on then tv will work for a shourt time before picture goes out again. i have looked at the four caps on the Dm board they dont look faulty or bulging but dont know if that is the problem


... Mitsubishi WS-65513 65" Rear Projection HDTV

Hello, (**please read**) I know everybody asks this question about Westinghouse products, but I am no newbie to the problems. I have a Westinghouse (SK-19H210S) and it has gone bad once, but I repaired it myself. It has (for the longest time) been randomly flashing off then back on for about 1s (only when i have my PC hook up to it) last week it did the same thing except this time it didn't turn back on. I have again, bought and replaced the bad capacitors that I see. I turn it on only to


Replace the power supply Bad caps are only part of what can happen with power supplies chances are you have a regulator issue or a transformer has failed. Replacement power boards are available at ... Westinghouse SK-19H210S Television

My vizio flat screen led television continually blinks now. I have reconnected all the cables again, I tried other outlets, I bought a new hdmi cable, the only thing I haven't done yet is throw it through my window. Please, don't offer up the normal answers to this question. I know, after doing some searching online, that I am not the only one experiencing this issue. If you can offer up a new solution it would be great! As of now I am not recommending vizio brand televisions to anyone. I


First of all, please provide the model number of this VIZIO and what else that you have attached to this TV, such as cable box, DVD player, etc. You also mention HDMI cable, it is for the DVD, or for the cable box.\012Second, the blinking sympt ... Vizio Flat Panel Televisions

I just hit a bouncing ball on my sony bravia 3d led. Nothing has happened yet but i just need to know if it will cause any problem in the future because it the same had happened to my last tv and it s


As long as the screen isn't cracked, you should be fine ... Flat Panel Televisions

My toshiba model TV 42AV500U TINE IS NEW ONE YEAR NOW, HAVE PROBLEMS WITH THE AUDIO, NO ONE HEARS FROM THE MENU AND I SEE THAT EVERYTHING IS OK. NOT IN THE MUTE FUNCTION, PLEASE KNOW THAT I What i need to do urgently


Unplug,replug tv and cables or satalites boxes back like about an hour later for the tv to do a restting itself back to the factory setting.Those pay boxes,to reboot and upgraded it softwares.Than go into the tv menu go to tv Audio Setting to do rese ... Toshiba 42AV500U 42 in. LCD HDTV

I have a Samsung LCD LN46C630K1F. The problem I am experiencing is picture with no sound. Any ideas on the problem?


... Samsung LN46C630 TV

I have same sony model, I have problem with vertical lines on LCD Screen, When i power recyle and switch on the TV, i can see the clear image , After on mintue and half the image fade and i can not see any image , some time the white background and some time i see the vertical lines, Can any body tell us whats the problem , how can it be fixed, Any help is really appreciated.


Unless you are really good in TV electronics, there is really no simple solution...the transformer for the video screen is heating and shorting out. I hope you have a warantee or guarantee on it! ... Sony 46 KDL46EX520 LCD TV

Viewsonic n4060w black screen, no video sound ok. So I've been reading this forum about the problems others have faced with this tv. I decided to purchase pair of inverter boards. After installing them the same problem, no difference. I swap the boards to see if I can find a defective one, nothing. I can see the black backlight on, I have replaced caps on the psw before. Can I suspect the psu once again or am I missing something?


... Flat Panel Televisions

Changed the main digital board it was the same they told me on the tuners there is a number it should match the original one like my original is n7hf but i dont know if somebodey changed it before i change the board twice it was the same problem. now my question is if the tuner number is different what problem does and how iam gonna know what was the original number on it


If the part number and revision version match , then you can forget about everything else. The part number will be printed on the board itself or it will be on a small label on the board. Post all the numbers you see on both boards(the board that you ... Sanyo DP32746 32 in. LCD Television

My samsung 46 inch LCD also has the problem of no picture, but clear sound. I read all the posts about capacitor problems, and have gone so far as to take the back off and the power supply cover to look at the capacitors. But they all look flat...I don't see any of the bulging noted in other posts. When I first power up the TV, it looks like it is lighting up, but after maybe 1/2 second of buzzing, the dim light goes off completely. Looking at it from the back with the cover off, you can see the


Samsung has had a lot of capacitor issues with some models, even if the capacitors look good they can still be open and need to be tested with special equipment to get to the root of the problem. They had so man ... Samsung LN-T4665F 46 in. LCD Television

I have samsung Le32r87bdx/xeu it just turn on for 2 second then goes off, i have had inverter board replaced , but the problem still. do you know what could be the problem? cheers


... Flat Panel Televisions

I have a mistubishi WD-Y57. I replace lamp 7 month ago, and now my tv doesn't work. I have sound but no picture. I took off the plastic grill from the back of the tv to see what it was doing when I tried to power it on. I see the fan turn on and see the light trying to cut on. It flickers light. It try two times before shutting down. If I see light flicking, does that mean the lamp isn't the problem? I tried to read the code light by holding those two buttons in front of the tv. But am not sure


WOULD YOU LIKE TO SELL IT ..LET MY NO LEE ... Mitsubishi WD-Y57 57" Projection HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0706 seconds