Having problems with your Flat Panel Televisions ?

Like yourself i have replaced 4 x 1000uF 10v caps (high temp) as the were distorted at the top. However my Samsung LE40R8 is exhibiting the same problem......Clicking noise and red LED going on and off. I was convinced this would cure the fault, having a basic knowledge of switch mode power supplies.



Answers :

Which voltage did you use for the caps? I hope not the same.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Like yourself i have replaced 4 x 1000uF 10v caps (high temp) as the were distorted at the top. However my Samsung LE40R8 is exhibiting the same problem......Clicking noise and red LED going on and off. I was convinced this would cure the fault, having a basic knowledge of switch mode power supplies.


Which voltage did you use for the caps? I hope not the same. ... Flat Panel Televisions

My Sony Bravia NX711 LED 3D tv keeps shutting off and resetting itself Turns back on for 4-5 seconds and just keeps repeating the same thing over and over unless I power the tv off. Just randomly happened while watching television.. After shutting off I kept hearing a clicking noise and the red indicator light would go on and off so I unplugged it. Need help please tv was purchase less than a year ago


... Sony Flat Panel Televisions

LC320ss8 shut down Red led lit - turn on - green led flashes 2 times - goes back to red led - power company had been working in area and power would ramdomly go out. At first would power up after unplugging and pluging in. no obvious burnt parts no caps appear to be bulging or leaking really need info on where to check for what voltages. schematic would be even better


... Sylvania LC320SS8 32 in. LCD Television

I have a Samsung LN40A550P3FXZA that is giving me problems. When I first started noticing problems I would turn the TV on and I would hear the power-up sound, the backlight would come on and then the red LED would flash a few times then the backlight would go off and it would repeat (power-up sound---backlight on---LED flash---backlight off). It would do this several times. Sometimes I would be able to get picture if I hit the source button on the side of the TV when the backlight first came


Try Samsung parts. They will almost always have the parts. As for the price. Its either 175$ for the board or a new tv. You have no other option ... Samsung LN40A550 LCD TV

I bought a 40 inch Westinghouse led TV. It keeps going back to set up mode. when I am watching something and I try to turn up the volume the TV goes back to set up mode (doest always happen... i would say every three times i do, it does) where I have to scroll down to "connect a game, Blu-Ray, DVD or other player then select my input". its very frustrating. I thought it might be a quirk in the remote so I tried getting a universal remote but it wont connect to the tv at all. I have tried severa


... Westinghouse Flat Panel Televisions

My Toshiba 42HL196 42 in. HDTV LCD TV HAD POWER FAILURE (SURGE PROTECTOR INSTALLED) ON POWER RETURN THE RED LED BLINKS TV WILL NOT COMPLETE THE REBOOT MODE AND GO INTO SOLID BLUE (OPERATING PROPERLY)


... Toshiba 42HL196 42 in. LCD HDTV

I have Hitachi Ultravision model 46UX25K I was watching in the morning then I shut it down properly by remote control, after few hours I try to turn it on, nothing , no picture just dark screen, I can hear light noise from the back of the TV going on and off within seconds but that's all, when I push the power TV button on my remote control I see the power light goes on and off but no picture. Upon removing the back there is a red LED on a circuit board in the back that also goes on and off when


... Projection Televisions

Hi There My panasonic TH42PWD8 is about 4 years old, and has recently started turning off by itself, the led switches from its usual green, to a flashing red. I counted 4 flashes, then a 3 second interval, and so it continues. I have read that this is probably a built in protection. What does this particular flashing code mean? How would I go about repairing?


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current pass ... Flat Panel Televisions

Panasonic TX-P42G10B I have a Panasonic TX-P42G10B which is just over 3 years old and out of warranty. It has never given us any probolems but last night switched itself off and will not switch back on. The red led light flashes 5 times, pauses, then flashes 5 times again. I don't want to splash out on repair if its not going to be economical, as would rather spend the money towards a new tv. Can anyone offer any suggestions please?


5 blinks - check the 5v SOS D Board since the set is a plasma.Your best best is to obtain a quote from an authorised Panasonic service centre on the likely cost to replace that board if required, then you can make a decision afterwards - to e ... Panasonic Standard (CRT) Televisions

TV won't come on, it just stays in standby mode The red led just blinks when you try to turn it on and hear a little whistling noise if you listen closely. I was thinking it could be a power supply issue but don't know. Help please


Hi.\015\012\015\012The TV staying in standby and the light flashing indicates that \015\012the TV is in fault mode (often called protect mode). This happens when \015\012an internal fault is detected, and the main board set the unit in fo ... iLO 3200 32 in. LCD Television

Hello, I have a Toshiba 57H84R rear projection tv that has developed a problem. Occasionally the screen would turn bright blue for a couple of seconds and then go blank (dark screen, like it had shut off). The red power button would go from a steady red light to blinking continuously and would have to be unplugged, then plugged back in to get it to come on again. One time it did this, there was a bright blue circle in the center of the screen and now there is a permanent yellow spot in the cente


I am 100% sure that this is not an issue with the CRT board(the tiny board attached behind the CRT's in this case the blue CRT). The problem is usually caused due to failure of high value resistors 500K-ohm or higher. Do you have an ohom-meter and kn ... Toshiba 57H84 57" Rear Projection HDTV-Ready Television

When i turn on the tv it makes a loud noise and the red led under the lightbulb flashes twice then the red led under the thermometer flashes twice


... HP Pavilion MD5020N 50" DLP HDTV

How do you get the LED red blinking light to go off so tv will go on? I've already replaced the led lamp.


... Hitachi 51G500 51" Rear Projection HDTV-Ready Television

I have a Vizio VO47L and at first when I would turn it on the picture would be really dark and the TV would make a bad buzzing noise for a few minuets then it would go back to normal. Now the picture just stays dark and the TV continues to make a bad buzzing noise


Your power board is bad it about 35-40 dollars at shopjimmy.com have a handy person install it be sure to unplug the tv first ... Vizio VO47LF 47" TV

We own a Sony FWD-50PX2 television. A few weeks ago it would not turn on. The power is going to the television. When you try to turn the tv on you can hear it pop and the red light showing it is off will flip to green and then turn back to red. We would like to just repair the TV as it is a very nice television set. We thought possible power supply, but it is trying to turn on. Any help you can give to help correct the problem would be great.


... Sony FWD50PX2/S 50 in. Plasma Television

Sabre 29he boiler cut out on low water pressure (constant red led) slowly brought water pressure up to between 1 & 1.5 bar Now in the off position green flashing led aprox every 4 secs as soon as I switch it to heating and DHW and call for heat or hot water LED flashes red aprox 0.5 secs. Ihave checked the water pressure switc the condense pressure switch and the high temp stat all are ok, I have also switched the boiler off and switched it back on after 3 mins to see if it would reset. Before I


... Flat Panel Televisions

I have a panasonic thp50u30a plasma June 2011 model and it has developed a fault. When switched on I hear 3 fast clicks with a 4th click which comes in about 10 seconds later. While this is happening the standby led flashes repeatedly until the fourth click and then the standby light flashes red 7 times. My research has led me to believe that either the SC, SU or SD boards are faulty.. If not one of them then a combination of all of the could be a fault. Thinking that it was the SC at fault, I w


... Flat Panel Televisions

My Sony LCD TV Model KDL-46VL150 will go to standby mode after watching for a while. When goes to standby mode, the red light will flash in six times interval, during the red light flashing, the TV cannot be turned on. After about 25 mins, the TV can be turned on again. But after watching a while, it will goes into stnadby mode again. whats wrong ? I have updated the software but it still doesnt work.


Hi,This isn't good. A 6 flash shut down means there is a problem with the backlights inside the panel.This TV was initially introduced in Oct 2009. If you might have bought the TV within last year or so, try to call Sony and check, if th ... Sony BRAVIA KDL-46S2000 46 in. LCD HDTV

Dear Fixya,I have a problem with my Sony Bravia Kdl-32u2000 LCD type television I switched on and the red led light flashes continually with no sequence and both red flashing power led and green led constantly are on at both the same time with no other life except a quiet high pitch noise from the power board area can anyone help me solve this problem.ThanksBrian


... Flat Panel Televisions

I Have A .AWA MHDV2411-03 When I Turn On The Mains Power Switch On The Tv - To On . The Red Stanby Led Lights Up As Normal Then I'll Press The Power Button On The Remote The Standby Led Lights Changes From Red To Green As Normal And The Tv Works Fine.When I Switch The Tv Off From The Remote Or The Mains Switch The Tv Switches Off As Normal. Now When I Go To Turn It Back On Again The Green Led Is On All The Time And The Tv Wont Work . When I Leave The Tv Switched Off And Disconected For Sev


... Standard (CRT) Televisions

Power Surge After house power went out and came on 20 seconds later, my Pioneer would not power back up. It has two LEDs - the blue "on" LED flashes 12 times on, pauses, and repeats the sequence over and over. I tried powering down from the switch and even removing AC power entirely for a couple minutes. The best it would do is to go thru it's normal power up sequence, show a "starting up - please wait" screen for a couple minutes, and then shutting back down with the blue LED flashing.


Charlie the proble has something to do with the tv guide here is a response from an older post\012Un plug the power to the Plasma Screen and also to the Media Receiver for ten minutes. Disconnect the off the air antennas both A and B. After ten minut ... Pioneer PDP-6010FD 60 in. Plasma HDTV

Screen issues Originally bought in 2005. We replaced the lamp bulb in 2011, now every time we turn on tv, it says reset lamp , also we get red vertical lines about an inch apart , all across tv, then in left lower portion of screen a green glow, circle around 4 inches, how can we correct this, also would it be cheaper to buy new tv, and what brand and type would you recommend? The red vertical lines come and go as does the green glow.


I think better to replace the set as all this sounds like a light engine failing. ... Projection Televisions

Intermittent fault when using sky+ box. Picture changes to red. Freeview pictures are OK as are the remaining analogue pictures. Scart lead changed and fault cured for a while then, back to the red screen


The most likely culprit is a poor connection between the two. Try reseating the cable between them when it happens, or try a new cable.I hope I have been of help but please do not hesitate to ask if you have any further questions.I appre ... Panasonic CT-36HL43 36" TV

I have an 72 in Mitsubishi and I have two problems first when the TV was turned on it would have two blinking green light and they would go orange then the TV wouldn't come back on for a while. Now I have one red light light that won't go off and the TV won't come on help


GOT A MODEL NUMBER? ... Mitsubishi Projection Televisions

Dark screen husband rolled over on the remote, have directtv all other tvs work well just this one dirrct tv says its the tv not them scsreen is dark can see red green and blue thats all the light it puts out also it seems to be in analog mode and I can't see the screen to try using system setup I tried going to tv mode and changing the channel to line one to or aux/ but can't get it to go there any ifeas


... Sansui TVS2750 27"

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1665 seconds