Having problems with your Flat Panel Televisions ?

I have a motorola vip 216 cable box and I use a one for all remote I need the code to program my remote to the cable box all codes that one for all states does not work please help!! Thank You



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a motorola vip 216 cable box and I use a one for all remote I need the code to program my remote to the cable box all codes that one for all states does not work please help!! Thank You


... Flat Panel Televisions

My 37in LG doesnt want to respond to any of my remotes, including the manufacture one. What can i do? i have a remote for the cable box that always work with the tv and it just stopped and when i tried the manufacture tv remote, it did not work neither. i mean i cannot raise the volume, turn-off/on.


Please try this, look in the back of the TV and see if it has a small jack the size of a small MP3 headphone jack labeled with 'IR remote input', if it does, insert a mini phone plug in and out a couple times to clean the switch contacts that selct t ... LG 37LC7D 37 in. LCD HDTV

Samsung TV Have a Samsung LN32A450 TV that the other night switched from component 1 to channel 3. Channel 3 has snow and the message "weak or no signal" in the middle of screen. Tried resetting cable box which didn't work. Called cable provider and was told it was the TV not cable. Have 2 other TVs in house that are unaffected. Tried unplugging TV for 5 mins which corrects problem but for only 30 mins or so. Last night volume on remote stopped working,all other buttons on remote work,and vo


Based on the information you described you may have a tuner circuit problem or power intermitent faikure fron the power supply module. ... Samsung Flat Panel Televisions

The remote control does not power the TV on and off. Plus I have comcast cable and I can't get the comcast cable remote to turn on the TV. The TV was purchased from HSN 42" lc hdtv model # LT The Tv turns off and on manually but the remote worked for a little while and just stopped working one day. I changed the batteries as well


Tv remote probally have dead CPU chip,all remotes devices heavily depended on it CPU chips.Try website like Remotes.com to buy an exact remote or very close to the original remote. ... Digital Lifestyle FA1B32Z 32 in. LCD Television

My UNIVERSAL REMOTE (from shaw cable company) won't respond to my TV: LG 32LG30 . Got another universal remote, same problem. Can't use power button or volume on the UNIVERSAL remote but it will change channels through the digital box but nothing else will work. Have sought help from shaw to program remote to no avail. Is this a common problem with remotes? The remote that came with the TV doesn't work either. According to the shaw service this TV remote should turn the TV on &


... LG 32LG30 32 in. LCD HDTV

My hisense 32 in hdtv iv had for almost a year has worked totally fine, than today we moved it to a diffrent spot in the room turned it and cable box on for bout 15 mins and come back in room after wiping it down with a paper towl with windex sparayed on towl and it is off and will not turn on or no lights nothing or remote tried fuses n plugs everything on cable box works just not the tv no power. Is there anything I can try or see to do why would out of no where it just die like this! Makes no


Check to see no master power button on rear, other than the cord not being in all the way the set would have to be opened to see if a bad fuse or not...... ... Flat Panel Televisions

I can only get one av on my TEAC CRT TV model No. CT-M711S and when i connect my set top box I cannot get it to work - i guess it needs a different av but I have tried and tride with the remote to find it but can't. When the av comes on screen there is a red arrow below it pointing down. I have tried the set top box that came with it, which is a TEACDigital Terrerestrial Receiver Model No. SDB440. Also I have tried my previous set top box that I know works for sure because I had it working


... Projection Televisions

Hi, our Zinwell ZMT-640PVR remote control does not work properly. One button after an other stops working. Today I got a ONE4ALL URC7555 R00 universal remote. It worked fine to pick up the TV but the Freeview box codes for Zinwell both did not work. Can you help and tell me the right code to use? Need help. Please. Kristina


... Flat Panel Televisions

I have a HP 4260N Plasma TV. About 4-5 years old. A week ago the remote would not turn the TV on, and there was no volume. I contacted my cable company and thinking it might be a remote problem they had me reset the TV and the Cable Box. So now, the remote and TV are working correctly from an on/off perspective, but the picture is horrible. Very faint, no color or limited color, and a bit fuzzy. Is this the dreaded bad YSUS Board problem??


... HP PL4260N 42 in. Plasma HDTV

The TV works however I cannot get the set to read the channels. I have cable but no cable box. Have tried to program it for over 3 hours. I've tried it using ch.3 and ch.4. through the remote. After I scan the channels, it tells me none were read. My other TV's work, so it's not the cable company. I even plugged the plug for about 30 minutes.


Check you cable or air settings. I would try cable setting first then scan channels, if that doesn't work I would try air and scan.I am not sure cable setup.\015\012also check tv input settings. the lcd's have an input selection button. it will ... Flat Panel Televisions

Just bought a new Panasonic TC-L42U22, connected it to a samsung time warner HD cable box via HDMI, but the cable remote is not working. There's picture and sound, but can't turn it on or off, change the channel or anything with the cable remote. Don't know what to do.


You have to program the remote to work with your specific model tv. If it still doesnt work after that call your cable provider and ask them for another remote. ... Panasonic TCL42U22 42 in. TV

I have just purchased a new 26 inch TV, full HD version, from Curry's. It was purchased to use with my new BT Vision + box. O have tried to get my BT vision remote to work my TV but all the codes offered by BT don't work. The man at Currys says check the Logik website but can I find one, no. The BT vision box says if you can't find the code refer to the manual, nothing there regarding 4 digit codes, hence my trip back to Currys. Whilst not life or death it would be nice to control the TV and


You mmight try looking at bt answer forum on same subjectvarious code options herehttp://community.bt.com/t5/BT-Vision/Codes-For-Logik-Tv/td-p/364531 ... Flat Panel Televisions

Moved tv to another room, it was connected to a cable box. Now it is just connect to regular cable but the remote do not work. How can I program it to get more channels (it only get 2 channels since I moved it) without the remote.


... SNK Magnavox 42MF438B/27 42 in. LCD TV

Rca p61939 My Rca projection tv worked just great then one day went to turn on there is nothing. I have sound but absolutely no picture. I have checked all cables, tried different cable box, dvd boxe etc. Nothing shows up on the screen at all, not even the standard channel indicator. What is wrong and can this be fixed and how?


... RCA P61939 61" Rear Projection Television

Some kind of weird hdmi surge took out my cable box hdmi output, the hdmi through my onkyo receiver and Mitsubishi wd-65c9 tv. Everything else associated with the components works fine. I tried all the normal stuff including unplugging and initializing the tv. No go. leads me to DM board? After initialization the tv will recognize a connection on hdmi-2 and 3, but will not work. The hdmi-1 port nothing. That is the one the surge came through (the one hooked to the receiver). Would like t


... Mitsubishi WD-65C9 65" DLP HDTV

LD-3237 The TV was connected to the cable box and worked fine. We then accidently tried to change channels with the TV remote rather than the cable remote and we have not gotten any picture since. Tried everything but still get the No Signal message. What do I need to do?


... Westinghouse 32in LED HDTV - Black LD-3237

Connected with cable box, cable remote works but volume will only go down and not up.


... Sylvania LC260SS8 26 in. LCD Television

I have coax cable coming from my sky box to the tv upstairs previously this worked fine but the it stopped so I bought a new magic eye and this worked for a while the light on the magic eye is not working now, the picture on the tv is good and the remote works the tv fine can anyone advise what the problem could be


... Flat Panel Televisions

Hi, I have a Sharp Aquos LC-19DV28UT given to me as a gift. I connect the cable from the cable box to the TV, give the remote the proper code, and the TV turns on OK. But then the picture flashes for a brief second, then the picture goes away. The sound is still there. Whenever I try to display any type of menu, it does not display. I tried the TV on 2 different cable connections that work with the current TV, and same problem. I have a feeling there's some setting I need to adjust, but c


... Sharp LC19DV28UT 19 in LCD TVDVD Combo

I have a Toshiba model 36A42 TV. I do not have the original remote. It has been working fine with the universal cable tv remote, I can turn it on/off with that remote, I can hear sound, but can not change channels. The TV screen somehow got stuck on one of the menu screens. It is a blue screen and says System Information at the top. It lists some information: Model, region, s/w ver, sdk ver, etc. At the bottom of the screen, it says System Reset Done. At the bottom left it says checksum: 14


... Toshiba 36A42 36" TV

My tv will not recognize my remote. It stopped working when I tried to program my cable box universal remote to the tv. The tv will not recognize either remote now. I have changed the batteries and unplugged the tv hoping to reset it.


Hello,Common faults are: some buttons not working, not working at all, corroded battery terminals. Often buttons are sticky because of some dirt accumulated over the years from the sticky little hands of your kids? The hardest ... Philips 32PT81S 32" TV

Our Memorex model #MVDT2002B, SH 067460905582A, was working fine. There was a short power outage in town during the work day. When we came home, the TV wouldn't power up. The cable box had reset just fine. We upluged and plugged back in, but nothing happened. We plugged a different, older TV into the same power source and that worked fine. Is there a reset button? We can't seem to find one. Also, we can't find our manual. Thank you, Janet and Brian


Hello\015\012There is a protection fuse inside your tV, which can be located at the power regulator section, to which the main power cable enters to the board. It is a class cartridge type, and can be replaced. Check it first. If found blown ... Memorex MVDT2002 20" TV

I have a samsung UN55B8000XF when I start up the TV and cable box with my logitch remote, the TV can't find the proper HDMI input. It has worked for 2 years but new problem.


... Samsung UN55B8000 55 in. LCD HDTV

Just bought a vizio e502ar 50" LCD. I programmed it with the scientific atlanta remote control UR5L-8700L. For some reason it will control de TV perfectly but stops controling the cable box. If I turn off the TV it will work again with the box. Any ideas???


... Vizio Flat Panel Televisions

I have two remotes. One to turn on the cable box and one to control the TV on/off and volume. When I was watching TV I hit the wrong bottom for the volume and now my TV is just noise and so picture. Can you tell me how to reset it? Thanks.


Program ur cable remote for ur tv and you will not experience this problem again. or alternatively call and complain to ur cable company that the installer never programmed ur remote and usually they will send someone to do it if you are incapable of ... Sharp LC-19SB25U 19 in. LCD HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1542 seconds