Having problems with your Flat Panel Televisions ?

Water damage soda dripped onto the controll panle on the right side of the unit. screen works fine but at odd intervels a set up menue apears. the volume controll buttons will on and off switch between setup menue and actually controlling the volume, other buttons have similar problems, if i replace the controll panle will this fix the problem

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Water damage soda dripped onto the controll panle on the right side of the unit. screen works fine but at odd intervels a set up menue apears. the volume controll buttons will on and off switch between setup menue and actually controlling the volume, other buttons have similar problems, if i replace the controll panle will this fix the problem

... Emerson LD195EM8 19 in. LCD TV

I appeal to you in a Grundig T 51-640 OIRT type device connection. The Act enabled the children because something may not be enough volume to a low (low) level be displayed in the dialog bar is moved to the lower left corner of the screen. Internet forums were advised that the device in the power switch on it and switched I hold the button and the service mode menu, choose the hotel but this did not help because I can not get the service menu, because when I turn in vain to hold the first It

... Flat Panel Televisions

Why wont my sentry RMC10 remote switch inputs on my emerson tv? It will change channels and volume. But it wont do functions like the menu button or input switch button.

Not all remotes will program for all sets or if do will be missing certain key features the original remote had. ... Standard (CRT) Televisions

Hi. My Sony KDL32EX400 started to have unusual problems few months ago. Channel, volume, menu, setting, controls stop functioning. (The little green led is flashing when trying to switch channels or control volume, but nothing else happens.) The only function works is the power. After I turn it off it shuts off but sound remains for another 30-40 seconds. Also sometimes display info remains on screen after TV turned on then the same problem happens, as mentioned above. I have to note that it do

Hi,Does Standby light flash/ blink on tv when it does not show picture or any display in screen?If standby light blinks, please count how many times it blinks after three seconds long pause to diagnose possible problem in tv.And if ... Flat Panel Televisions

Pioneer PDP-5010FD 50-IN 1080P Plasma HDTV; The power comes on but the screen remains blank and no volume. Able to use MENU and DISPLAY buttons on remote control, as well as change the INPUT channel.

... Pioneer PDP-5010FD 50 in. Plasma HDTV

Remote sensor on tv not responding I,have to turn on tv manually. change input manually,tv reception is ok. Volume cannot be controlled,it will lock in at full volume or drift back & forth,mostley full volume. If I use volume buttons on tv , it changes input (video 1 pc hdmi & so on) Once in a while setup screen will appear then disappear. I have changed batteries in the remote, I don't believe this is the problem.When tv is first turned on the volume icon at bottom off screen will go from 0-60

Have you checked your remote to see if its working? If you have a digital camera or camera phone, point the remote at the lense and see if it shows up on camera screen. If it is working then the IR sensor on the tv could be bad. ... Sylvania LC420SS8 LCD TV

Philips 26pfl5522d/05 turn the tv on, blue screen once warmed up and DIGITAL TV the only menu option that works from the remote is the volume bar. Cannot Factory Reset as cannot access menu. Turned on tried once on holding and releasing MENU (on TV control panel button) nothing. Cannot select HDMI source (cross in grey square displayed), the tv has locked me out!! Please Help

... Flat Panel Televisions

Couldn't initially set up my LUXOR LUX-32-914-IDTV for freeview. I can't get on the menu unless I use the actually buttons under the tv. I can only use to volume buttons on the universal remote. I've had enough of trying! Someone help me ASAP

... Standard (CRT) Televisions

I have a Panasonic PT-56DLX75. Remote and TV buttons can only turn TV on and off. No other buttons work so I cannot control volume or use menu for dvd. What are my options?

Try using another video input source to see if it is just the DVD player, or DVD input, also try using another set of RCA plugs, you would be surprised how many times 1 RCA connector goes bad.If no other input sources work and you are sure your cable ... Projection Televisions

I have a problem with my Toshiba CT-90295 remote. The upper left switch where the TV, Regza-Link, DVD mode is located is loose. I cannot switch to TV mode. i was thinking of getting a universal remote but then it might not pick up the correct signal or code for TV . Right now the volume controls and mute buttons are the only ones working. I would appreciate a speedy advice. Thanks!

... Flat Panel Televisions

JVC genessa model LT-32X776 trouble shooting. I have no picture when powered up. The menu flashes instantaneously on screen when menu button is pressed. Volume control works but can't change channels. [email protected]

... JVC Flat Panel Televisions

Using a replacement remote control, and during channel surfing closed captioning came on. Now I can't get it to go off. Have tried using replacement remote's menu button, but can't access the setup menu. Any suggestions? Thanks in advance!

... Sansui CDVD1300W 13 in. TV/DVD Combo

Had this TV for a couple of years now. We bought it new. It has started switching itself on and off standby. When you press any button on the remote control the screen goes black then comes back on again a couple of seconds later Cannot turn volume up or down for this reason Cannot access the in-built programme information We could switch to HDMI and watch things on the playstation last night, but now it has stopped allowing us to do this too. Changed batteries on remote Please

With no make or model, it is a little difficult to try and decide what the problem might be but, I would disconnect the touch button panel on the TV, if it has one. That could be the fault. ... Flat Panel Televisions

TV is stuck on HDMI input and can't: adjust the volume, change the channel or switch Iinputs from the remote or the controls on the TV. None of the TV controls are responding with the exception of the power button on both the TV and the remote. I have tried unplugging it, waiting and turning it back on to no avail. Any suggestions?

... Westinghouse W4207 42 in. HD-Ready LCD TV

Model No M227WDJ menu button on remote control and tv has stopped working. Can't get to setup.


My 42PFL3704D philips tv the volume will just go up to a maxium of 100 byitself,and you cant turn it down with the remote,and you cant turn the volume down with the side button so I have to turn it off,and when I turn it off with the side button and turn it back on again with the side button it will come back on,play for about 30 minutes and the volume will go back up to100 again,and if I can get the volume down,then the setup screen comes up and I have to go through the setup screen and it will

... Philips 42PFL7422D 42 in. LCD TV

My grandson opened the door under the power switch and i think he hit something under there (input, menu,volume,channel etc) but the power light just blinks red and the tv wont turn on. I have tried hitting all those buttons and using the remote. please help our tv is Hitachi 57 in. Rear Projection HDTV-Ready Television.

Un plug it for 30 seconds and see if that helps. ... Hitachi Flat Panel Televisions

I have a Samsung LED 40 inch model C6620 and we have Sky HD box. All of a sudden we cannot switch off the TV from the Sky remote and also cannot control the volume or mute button. Everything else is worrking on the sky remote. What do I do ?

Try this...Press tv on the sky r/c.\015\012\015\012Then hold the select and red button at the same time,the red light should flash twice.\015\012\015\012Then enter the code 1340,the red light should flash twice.\015\012 ... Flat Panel Televisions

We have a DVR hooked up to our 1989-99 Mitsubishi TV (floor model) still in amazing working condition. The remote control for that TV never allowed us to put the TV on mute. If the mute botton was pressed, the TV would switch to the input mode as if for a DVD or whatever. Hit it again and it would return you to live TV. Cable people have no clue--must be the TV they tell me. Problem: two weeks ago when dusting and moving my tv, I hit the mute button and this time it actually put the tv on m

Well, without knowing the exact model of tv and remote, I can just give my best guess.Try using the volume up/down on the TV and / or the remote.On the TV, try pressing both the volume up and down at the same time.Stick the remote r ... Mitsubishi Flat Panel Televisions

My panasonic th50pz70b has started every few minutes the colour fades to a dull picture which is returned to normal colour by me pressing the volume button but will repeat this fault continually. i also can not get into the menu via remote control. cheers chris

... Flat Panel Televisions

I Have a Samsung TV Model#LN40B500P3FXZA, Version SQ01 the volume is at 100% and can not be changed using the remote or the volume control button on the TV. In fact, the remote can not control anything and the volume control button on the TV will sometimes change the channel. Ive tried unplugging the TV and restarting it after an hour but this does not work. Please help. Thanks

Check its front panel switches for damage. If any one among them has got strucked, this type of fault can occur. ... Samsung TXN1430F 14" TV

Volume Control Once TV is turned on volume goes to 100%, can manually bring the volume down atop the TV with manual control but once I let go of it the volume goes back up to 100% on its own. I go into volume control and while in menu can control the volume with the handheld control but when I exit it once again goes to 100%.

Look for any jammed buttons (keys) on remote control and/or on control panel. ... Flat Panel Televisions

Volume control Can't seem to get the volume control up to the maximum. Can get into the sound menu everything is highlited except the ADV line which allows you to increase the volume, when scolling down to this it just misses this an d goesa back to the top of the menu.

... Insignia Flat Panel Televisions

What's your problem?I have Samsung CS-29Z57MQ (29in CRT Slim TV) and due to curverd corners I tried to set using service menu (info - menu - mute - power). While setting I accidently pressed INFO button again and it auto changed some G2-Adjustment values. I switched off the TV. From after that TV is not turning on, its on standby mode and when I press power button or service menu button I only can hear the click but again no picture comes and it goes to standby again.

... Samsung Standard (CRT) Televisions

Toshiba 32a33. I'll be watching tv and the volume bar shows goes down to 0 (no sound) when it is in this mode the remote control will not work on the volume, you can get up and manually up the volume but as soon as you let go of the volume + button. The volume climbs back to O (no sound). Every once in while it will repair itself and life is good, well it's now back to it's old tricks. I have tried unpluging tv, putting new batteries in remote control, don't know what else to try. HELP I think i

1st check to see if your remote volume down button is stuck. 2nd do you have wireless internet (router) or any other wireless devices phones,ceiling fans, another Toshiba remote, if so try unplugging them (or remove the batteries if it's a remote) wh ... Toshiba 32A33 32" TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1522 seconds