Having problems with your Flat Panel Televisions ?

I've got my computer connected to my HDTV as a monitor through a DVI-HDMI cable. No audio is carried, as expected so I connected my audio(the green end, I forget what's it called) to the appro



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I've got my computer connected to my HDTV as a monitor through a DVI-HDMI cable. No audio is carried, as expected so I connected my audio(the green end, I forget what's it called) to the appro


... Emerson LC320EMXF 32 in. LCD TV

Church has two tvs and we hook them up to our Macbook pro and use a progam called Mediashout to play lyrics. When we have both tvs connected through a splitterbox they blink green and the image trembles. But when we remove the HDMI cable from the splitter and connect it straight to one TV its fine. How do i get the Two tvs to stop blinking? Help?


HDMI comunicates between the output device and the tv. The two components sync the comunication pulses. By conecting the second tv the pulses are out of sync. Somehow one tv must become Master. Is there a function on tv2 to turn off the sync puls? Ma ... Flat Panel Televisions

Sony Bravia 46" NX810 shuts down no blinking red lights. The green light stays on a couple seconds longer than the screen is off. Then the green light goes off for a second and back on with the screen. Will happen a few times on fresh start up. Will happen randomly as the tv is on. Current connections are hdmi to Mac mini.. RGB to DVD player. Hdmi to dvi cable and occasionally a VGA cable. Has worked fine in the past with more connections.


... Sony BRAVIA Flat Panel Televisions

Samsung 40 inch 5500 model bought 1 month back. While the TV is connected to internet and I play videos using the web browser (eg youtube or anyother video sites) after some time the session ends and it says restore session or start a new session. Please help me how to resolve this. However while I play videos using you tube application, there is no problem. I have interruptions while I use the web browser and the session ends. I have connected the TV with Internet LAN cable directly.


Look for timing set for loading of games. If this is too short, you can get into such problems, if the line is not speedy enough. ... Samsung Flat Panel Televisions

I have model ELDFW406, when I connect coal cable to Sony dvc (orange rca connect) and connect to tv coal rca connector,,,,no sound, when playing dvd......dvd, already connected to tv, green, blue, red


... Element ELC-HS321 32 in. LCD TV

Dvd connection have red,white, yellow cables connect the red and white but tv has green& blue were to put yellow in


... Vizio VO32LF 32 inch TV

Philips 37PFL5603D/10 tv, connected to Humax HDR-Fox T2 recorder. We do not have the HD signal yet, but due in June this year. Problem is with the HDMI connection, mostly does not work, sometimes green picture, no sound. Also does not switch automaticaly When box is switched on or off. Will only switch properly when a scart lead is also connected. You should not have to use a scart, when you have HDMI. We need the HDMI to cope with the new digital signal when it comes. Have switched Humax


... Philips Flat Panel Televisions

I'm running dual Samsung 305T monitors and one of them has been flickering from time to time. It just starts to flash and flicker. Now, it's all green and fuzzy. Still can see everything, but it's got a green hue and bad resolution. I swapped the cables on the two monitors, but the right side one is still green, so not a cable or connection issue. Thanks!


The flickering problem you have is caused by the monitor's t-con board, The Altera chip on the T-con board is having a bad connection because of dead soldering points or cracked soldering joints, the solution for this problem is to have the T-con boa ... Samsung SyncMaster 305T 30 in. LCD Television

I have a problem using a VGA cable to connect a laptop to my Insignia 32 LCD TV (model NS-32E570A11). I have found that the TV will power-on but "freeze" if I have a VGA cable connected to the back of the TV (regardless of whether the other end is connected to the PC laptop or not. The laptop is an Acer Aspire One D255. By freeze I mean power light is blue, but no display, no response on remote or side buttons and this requires the power cable to be disconnected, the VGA cable disconne


There might be some garbage in the monitor processor, so unplug it from the wall for 40 min. and that should reset it back to normal. ... Insignia IS-LCDTV32 32 in. Television

Recently my benq mp620p projector stop working. When I connect the power cord the power button lights up green and the power led orange as usually. When I push the power button, it starts to blink in green, the filter wheel starts to spin and the lamp starts to warm up with some light comming out. Few seconds after, the fans start, the power led becomes solid green and the lamps goes of. I can't do anything else since that other than unplug the power cord. No response to any button. Any help?


I'm assuming that you have checked the bulb and it appears ok. Either the inverter/ ballast board has a fault or , much more likely, the control board is no longer capable of finishing the loading of the firmware. This is usually caused by the failur ... Flat Panel Televisions

What is the front panel board connected to the the touchscreen (power, channel and volume) called on an ln40c530 samsung LCD TV called? I need to get it replaced.


... Samsung LN40C530 TV

Protron PLTV32C gets green flickers when connected to my PC HELP??


... Protron PLTV-32 Television

We have followed every letter in the manual but have been unable to program channel 2 on our TV.  This channel is a legitimate channel on our other TV that's connected to a cable box. In the Toshiba, the cable is directly connected to Ant1. Am I missing something?  This channel used to work some months ago.  Is it a change from the cable provider's end that has caused this issue? Any help would be much appreciated.


I would try two things here---first with the remote for the set direct enter with the numbers on the remote 02 and enter to see if set will go there and second connect a different set to that connection to see if same issue or not. ... Flat Panel Televisions

Im trying to connect my sega dreamcast which has red white an yellow av cable only, however my insignia NS-32E570A11 led tv only has for component connection with the blue green n red, when i hooked it up, all i got was a black n white picture and no sound. what can i do?


Sorry, this will not be easy....\015\012\015\012You need to locate a composite to RGB converter box.\015\012\015\012Your Sega outputs a composite signal - Video (yellow) and audio left/right (white/red).\015\012\01 ... Insignia 42" LCD Flat-Panel HDTV

Samsung lcd tv screen gone green but test pic fine. only happened after laptop connected to watch a film, which I've done before and when laptop is connected colour is fine for using laptop for an


... Flat Panel Televisions

My sylvania 32inch model#ld320ss8a makes a beep noise then shuts off then the green power light will keep blinking fast and sometimes comeback on other times i have to unplug for awhile and turn back on but it sometimes takes awhile cause green power light will blink faster and faster then go to red stand by light keep doing that till it comes on so any suggestions on whats wrong.


... Projection Televisions

When connecting my Cable box through an Onkyo SR 705 Receiver and then through a Samsung DLP HDTV HL67A750... I first get a message "The HD Protection of your Repeater has been compromised. All of the devices connected will not be authorized to receive video signals." The the picture on my Samsung TV turns green. I spoke to Onkyo Support, and they said that the adapter is not HDCP compliant... and therefore will not work with the Onkyo SR 705. Any thoughts of how to solve the problem


... Flat Panel Televisions

42PZ77U Panny Plasma tv. I just sent the SC board for repair, but in putting it back in the SU board(s) TNPA4383 that are connected together by a little plastic ribbon type cable, one side pulled out and a little tab popped up. I put the end back into the connector and pushed the tab back down and it clicked. Is this how that little ribbon piece fits in? Don't want to turn it on now as I'm afraid of that little connection might be fubar. Any clue? Thanks.


This is how the connect, just make sure that they are connected tightly and that you didn't bend any of the pins and you should be good to go. A bad ribbon cable connection on the bottom will result in a vertical black bar though the screen, if the r ... Panasonic TH-42PZ77U TV

My Samsung tv keeps going green I have to keep making it normal screen Every half an hour which is annoying Can anybody help me work out so it doesn't turn green anymore If it helps its connected to


It sounds like a plasma recharge is needed ... Flat Panel Televisions

I have a LG 32LC7D - AB, the power light goes from red to green when using the remote to turn on , all functions make the green lightflash but no picture or menu. It was connected to my computer over night, is there a safety shut down switch ( hidden ) ? Thanks for any reply and/or assistance.


... LG Flat Panel Televisions

I need to get into the factory service mode either by the controls on the tv, or the remote control to adjust the red green and blue offsets and the red green and blue bias to adjust my black and white background. My tv mode and connection of a dvd/vcr player mode is bluish or greenish or pinkish. I can't find the service manual on the internet. They want over $80.00 to adjust the black and white. I tried resetting the tv to original factory settings, but it did not change the background. I also


Good day!If you want to reset your TV on the factory settings.You have to do is push the menu button on your remote and go to the settings and find the default.After that the factory settings is activated.Then finally go ... Polaroid 1521-TLUB LCD TV

I have a apex 32-inch tv model (AT3208S), This tv was connect to a converter box, the other day electric power went out in our area for about 8 mins or less, once the power was back on the tv screen was blue and have remain this way. I have disconnect, scan, unhook, chg to 3/4. I went to Best Buy, came home a connect, with the same problem. I called Best Buy Tec support, they tried different things, reset, unplug, disconnect ect, same problem the tv screen still blue. The tv is working and the c


OK, I have one of these TVs, and here's a thought: There's nothing wrong with the TV nor with the cable converter box. Please bear with me. Since I don't know how much you may know about TVs in general and this one in particular, I'm going to assu ... Flat Panel Televisions

I have a Logik LRF2101 TV. It had been working fine with a freeview box. I plugged in a BT vision box and it has now coloured the screen red, green and blue. I removed the BT vision box and connected it back to the freeview box - now I still have a red, green and blue screen.


... Flat Panel Televisions

GPX 1510. Ha ving trouble with the power. It flashes a green light with no picture. It has done this a handful of times but always came on..not this time..it flashes green abt a dozen times and then goes red...almost like its not connecting...weird


Will ur tv the power supply board finally completely gave out.That the board where the tv power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole new refurbish power supply board for the replacement. ... GPX TD1510B 154 in LCD TV

My 50 inch Philips Plasma TV is normally connected to a Virgin Media HD Box in order to watch TV programmes. Tonight my TV is showing a box that is called Information, and it has the wording No signal or bad signal condition. Please check antenna connection and position. I have attempted to switch the TV off and unplug it from the mains, however the remote control and when pressing the buttons at the side of the TV nothing is happening. When I first switch the TV set on the power light is flas


Unplug both the set and box from power for a while--either may have caused a glitch---power both back with everything already connected and see if the reboot that will happen helps or not--a lot of times the box causes this by confusing the set it is ... Philips Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1075 seconds