Having problems with your Flat Panel Televisions ?

What do I do? My lcd 32" emerson tv won't turn on it flashes green then goes back to red, regardless wether I hold the power button down it goes back to standby mode

\015 It seemed to work just fine yesterday and when we tried to turn it on tonight it quit. I wwass working earlier but Im not sure why it quit, it just stays on standby mode and flashes the power on button once.\015

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

What do I do? My lcd 32" emerson tv won't turn on it flashes green then goes back to red, regardless wether I hold the power button down it goes back to standby mode

... Emerson Lc320em1 TV

I have a warfedale lcd26hd tv and am having a problem with it powering up, wether I use the remote or the button on the tv, when I try to turn it on it seems likes it's going to power up and sometimes gets as far as seeing the tuner symbol in the top corner but then just switches off and goes back to standby mode. Any ideas?

... Flat Panel Televisions

Panasonic tv my tv went into standby mode about a year ago i found a solution online and it was like hold power button in for so long and press something else on remote and it came back on now its doing it again and I can't find taht solution anywhere its stuck in standby mode blinking 10 times

Try couple of things .hold the volume button on the tv and at same time press the menu button rapidly 3 times.if this does not get into the correct screen try holding the volume button on tv and press the zero(0) button 3 times rapidly and another is ... Panasonic Viera TH-42PZ80U Plasma TV

Mine stays in standby mode. When I press the power button it goes green for a half second and goes back with a loud clck from the Speakers. Please tell me its just soldering work.

Hi Brian,\015\012\015\012Bad solder joints will affect the performance of the power supply and may cause a subsequent shutdown but that's is only one of the factors. I've suspected that you have a leaky capacitor in that section or a faul ... Pioneer PRO-200 60" Rear Projection Television

Hitachi 55PMA550 I have a Hitachi 55PMA550 monitor linked to a skybox. The Hitachi goes on into standby mode on power up, I then use remote to start the Hitachi, the standby light goes green (start mode) & picture comes on in 3-4 seconds mormally. But now after 1 second (without picture) Hitachi goes back into standby mode of red light. I can hear sky tv sound (Hitachi linked thru sky to sound) and checked all cable connections, they are ok. Any advice would be most appreciated, thanks.

... Hitachi 55PMA550 55 in. HD-Ready Plasma Television

I have akai CT 2579 model TV. After 5 or 6 minutes my TV automatically goes into standby mode. After 4 or 5 seconds, when i press power button from remote control or press main power switch from the main board, it starts working and again after 4 or 5 minutes, it goes again into standby mode.

... Flat Panel Televisions

I have a Magnavox 20MF251W/37 that when I plug it in it turns on to the standby mode (red power light). When I power it on with remote or by pressing power button it does turn on (blue power light). Shortly thereafter, I do see an image (snow at this point since I don't have it plugged to any video source). However, that image stays on the screen for only 1 second then disappears. The unit is staying on and is NOT going back into standby mode (power lights stays blue). I have replaced main

Hi tempcheck,\015\012\015\012Lot of brand have a common symptom when there's a malfunction in inverter board, it will automatically shuts down the unit. This is because there is a protection circuit designed connected from this board to the mai ... Philips Flat Panel Televisions

Lnt3232hx xaa When tv is powered on standby light blinks 3 times slowly,does the start music but then standby light goes and set is dead pushing the power button again makes the tv cue the turn off music and standby light goes back to solid

... Projection Televisions

What's your problem?I have Samsung CS-29Z57MQ (29in CRT Slim TV) and due to curverd corners I tried to set using service menu (info - menu - mute - power). While setting I accidently pressed INFO button again and it auto changed some G2-Adjustment values. I switched off the TV. From after that TV is not turning on, its on standby mode and when I press power button or service menu button I only can hear the click but again no picture comes and it goes to standby again.

... Samsung Standard (CRT) Televisions

Screen comes on for 20 to 30 seconds then goes black. the power light is blue (on). when i hold the power button on tv it comes on again then goes off after 20 to 30 seconds. i have tried all the differant inputs, except for the pc input and i get the same results. i opened up the back of the set to see if it could be a bad cap but everything looks good,no burnt smell, nothing melted or poped, could this be a bad input board? This tv is not used much (less than 1000 hrs) it is clean and looks ju

... RCA 32la30rq 32 Tv Black 720p Lcd - - RCA

Turn power on, power light blinks 3 times and goes back to "standby" mode. tried unplugging for 1 minute to reset, plugged back in and same result. called support line but can not find reciept for purchase date so can not get warranty repair.

Many tvs are having problems with the capaicitors on the power supply. I would remove the back of the set, locate the power supply, and look at the top of the capacitors "barrels", if the top is bulging up slightly, they are bad. Usually 6 of them ... Flat Panel Televisions

Sony KDL46EX710 Goes into power save mode almost every 45min Sleep Timer is not activated. The Screen switches off the standby light does not flash just stays green if u press the HDMI channel on the remote the tv comes back on with the message power save mode : Off

... Sony KDL46EX710 46 in. 3D LCD TV

Magnavox 32mf338b/f7 TV is stuck on standby mode, wont turn on (green light blinks, then goes back to red)

... Flat Panel Televisions

My tv dvd 37"neon combi comes back on when the green power off button is used. it goes back onto standby and then the telly comes back on. any ideas?

It sounds like the main board which controls everything may be bad--not a do it yourself repair---please consider having a tech or a shop look at the set and give you an estimate. ... Sharp Aquos LC-22SV2U 22 in. LCD Television

I have a Sylvania LC320SLX that will not turn on. When I hit the power button, the power on light blinks about 15 times then goes back to standby. I disconnected the cable input and unplugged the power cord for a minute, but had the same results. Any suggestions?

This is a common problem an a failry easy DIY fix. \012\012Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your ... Sylvania LC320SLX 32 in. LCD TV

After watching for about 2-3 hours, the picture and sound will go off. The power light stays on. After a few minutes ,it comes back on. If I hold the power button on the remote when it goes off, it

... Philips 37MF321D 37 in. LCD Television

I have a pioneer elite television. The red standby light is on, everytime I push power button it goes off. Cant get the blue light on for the tv to work. Think its stuck on standby mode. tried unplugging but did nothing.

In most cases the standby light might blink with different rapidity to indicate a fault relevant to the processor. It is possible that most of these indicate that there are errors in the processing section . Since there is a possible short o ... Flat Panel Televisions

Lcdx37whd88 when power button is pressed at side on tv it comes on to standby.a blue light is lit on front of tv. when you press remote to turn tv on,light goes off but screen is black and goes back to standby

Sounds like your power supply capacitors have failed. Google for Z1234TV and see if you can locate a power supply capacitor repair kit for your model. ... Projection Televisions

My lg tv is stuck on standby if you press the power button standby light changes to green for a second then goes back to red

... Flat Panel Televisions

The standby light on our tv is on and when we push the power button it comes on for a few seconds and goes out then won't come back on unless we unplug it and plug it back in don't know what to do please help

... Memorex MLT1912 19 in. LCD TV

I replaced the main board in my sony Kdl-32S300. When turn on power, the back light flashes 3 times then goes into standby mode after which the standby light flashes 12 times in sequence. What could be the possibles causes.

\012 B+ over voltage protection (OVP), unit goes to the standby mode then\012displays the 3 blink fault. This is also a problem in the power\012supply circuit, check T603 and R672. \012\012Have you set the output voltage correctly? ... Sony KDL-32S3000 32 in. LCD Television

I have an AOC LCD tv when I hit the power button the light turns blue and then right back to orange, at first it would eventually come on after pressing the power button several dozen times and work fine until it was turned off, now it just goes from orange to blue and back to orange or the light goes out completely. I saw a video that said when it does that it could be the power supply or the main av board, what do you think?

Hi there , sound like it may need output caps replaced in the power supply . ... AOC L26W861 26 in. LCD TV

My lg 50pc1d is stuck on standby, press power , button and led goes from red to blue then back to red,

... Flat Panel Televisions

Sony FD Trinitron WEGA..won't turn back on TWO Blinks---B+ over current protection (OCP) , unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of an

Visit this site for details. All information about this type of fault [2 blinks of standby light to sony Trinitron]; are described here in detail."Electro-help", is the name of the site.Search for it on Google. ... Sony FD Trinitron WEGA KV-30HS420 30" TV

When i switch the power on my sony klv32a400a goes back into standby mode. wats the problem?

over current protection (OCP) or over voltage protection (OVP), or a few other possibilities but you need to clarify. Does the screen show anything at all? Is the standby light flashing? if so how often (3 tim ... Sony KLV32S400A 32 in. LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1452 seconds