Having problems with your Flat Panel Televisions ?

I have an ELCHS321. My backlight started to flicker. The inverter board is JLS-05-32EI. I have the back open and noticed that the LED on the inverter board was blue and flickering as well. As the set warms up the LED turns white but still flickers. The LED goes solid white and the flickering stops. Is this caused by the inverter board or or the backlight. Is there anyway to load the inverter board output to isolate th problem.



Answers :

I would suspect and check first the voltages going there to see if low when cold and come up and if they are moving up and down when it flickers----points to problem in power supply

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have an ELCHS321. My backlight started to flicker. The inverter board is JLS-05-32EI. I have the back open and noticed that the LED on the inverter board was blue and flickering as well. As the set warms up the LED turns white but still flickers. The LED goes solid white and the flickering stops. Is this caused by the inverter board or or the backlight. Is there anyway to load the inverter board output to isolate th problem.


I would suspect and check first the voltages going there to see if low when cold and come up and if they are moving up and down when it flickers----points to problem in power supply ... Element ELC-HS321 32 in. LCD TV

I got a Sony Bravia KDL-40WL135. Blank screen. There's two LED lights: red standby and green power light. When I turn on the TV, green led comes on, then after about 30 seconds red led blinks once, then green resumes. The green led stays solid. I think that's a SONY error code, I tried to look it up but can't find anything useful. I have replaced the power supply, AU board, backlight inverter, logical board, and the second power supply board. Any suggestions? I haven't checked the t-con bo


Http://www.smpcshop.com/KDL-40WL135-KDL-46WL135-p-8895.html\015\012\015\012\015\012\015\012Above is a link for a service manual.\015\012 ... Flat Panel Televisions

I have a Vizio VW32LHDTV10A that produces sound but no picture. I have checked the main power board for 24v to both backlight inverters and 24v is present. I then hooked up both backlight inverters and turned the TV on and the blue LED on the Slave inverter comes on, but goes off after only a few seconds. What further tests could I perform to check which part is defective or what component is the most likely cause?


When you reconnect the inverter boards, when the LED goes off on the inverter board, do you still see 24vdc? You shuld also ty hooking up test lamps to the 24vdc to see if it will stay on.\012Right now I have a feeling the problems are in the b ... Flat Panel Televisions

Magnavox 32MF605W/17, flicks, no picture. Firts there was no picture, LED stayed amber. I opened it up, replaced 5 blown caps on mainboard, now when TV is turned on, LED is green, screen flicks white for half-second, then goes black, LED stays green. Does it look like inverter board is bad, can't light up CFLs? Thanks


... Philips Flat Panel Televisions

Have an Element LCD model number flx-3210 that loses raster after 1 minute. Audio is fine. No blink codes and all caps are fine. Checked ESR and replaced common failing caps already. ec17 and ec18 450v 10uf. Also changed d10 and FETs q17 and q16. Nothing changed. When I lose raster, the LED D13 on the power board lights solid. I do NOT have any backlights on. Dark room tested and backlights go out completely when this happens. I also tested the two transformers on the inverter side of the pow


Hi Jeramy.These TVs are indeed re-branded Polaroid. You will not find the service manual under Element. You must find the equivalent Polaroid TV.The Polaroid Flx-3202 is the same as element flx 3202 and 3212 the FLM-3237 is ... Flat Panel Televisions

I have a RCA l32hd35d version A I can turn it on and it comes on and the backlight goes back out. The rest of the tv works and it has a picture if you look at it close. Just no back light. I have replaced the inverter and the problem is still the same. The blon pin on the inverter has 3 volts on it even after the backlight goes out The 24 volts is still there too you can keep turning it on and off and the backlight will stay on. any help will be great...


If you have 24vdc feeding the inverter board, the next signal you need to find is the BL_ON SIGNAL which will turn on the inverter board, it should be 3.3vdc or 5vdc on that pin (pin 12 on CN1 of the inverter board), see picture here:\015\012 ... RCA L32HD35D 31.5 in. LCD HDTV

Hi, I came across one of your posts and had a question.  I have a p50hdtv10a, it  died, now the screen flickers and turns off. I've noticed that the led on the main board's power input shuts off and then a relay on the power supply clicks and the tv shuts off, the ysus board is clicking while all this goes on, the pattern of the flickering and the clicking on the ysus board are dead on. Which board could cause these symptoms?


The transfformer and Transistors on the Y sus . Replace the Y sus and you should be fine. There were 4 different Ysus boards used in that model. Contacting the guys at www.tvcir ... Flat Panel Televisions

47LG50 screen light goes black after about 45 minutes of being on, sound still ok. Turn the tv off and back on and its fine for another 45 mins to an hour. The on/off light goes from red to blue-ish when screen goes black. As a note I took out the power board adn checked the capacitors and none where bulging or burst (someone said maybe they are drying out)...does that sound like the problem of is this an inverter board issue. I just want to change the what might be the most likely issue


Good day!That problem is commonly happens when the inverter board failed.But before you replaced that its better to check this out first.Just follow this simple and D.I.Y procedure on troubleshooting. ... Flat Panel Televisions

I have a silvania Model No. LD370SC8 S and after 20 minuta the screen goes white i can see the blurry imagen but the screen stay white until i turn off the tv and let it cold down,the audio is fine and imagen work good for 20 minutes after get white screen,i replace the lcd controller board and the main tuner board and the problem still exist...any help...thanks in advance


Hello\015\012Have you checked the voltage at the video board when it goes white? Goes white screen means, only backlight is there, and no video at all. Check this. If loss of voltage or less than normal voltage it should be there, power swit ... Flat Panel Televisions

Everytime i turn my LG 47le5400 tv on the screen flickers white until it compleatly goes white. I can still see my screen behind it but there is this white layer overtop that just gets worse everytime I turn it on. I still have sound and it is only 2 years old. Please help and thank you!


Contact LG to see if a known issue in this model---I would suspect either the power board or the main board. ... Flat Panel Televisions

I have a Toshiba Regza 42HL67US, it turns on and baclights come on for a second then shut off, still have sound no picture, bought inverter boards (master and slave) but still does it. What else runs the backlights??? Don't want to keep replacing boards till I get it fixed.


... Flat Panel Televisions

With the out of warranty lcd tv Sharp recommended a service in town and they after about 5 minutes determined that I need to replace the inverter boards. They wanted over $500 so I deciced to replace them myself. Installed the boards and after plugging in the power the unit "clicked" then when I pushed the power button it clicked again then aftger about 8 seconds clicked the second time and nothing. The led started flashing steady on-off-on-off. When I first plugged in the led was on solid, now


You still have a power supply problem ... Sharp LC-C4662U 46 in. TV

I have a vizio vz37l tv. When i turn it on the screen lights up, however there is no picture on the screen. the sound works, its just no picture on the screen. I read on a couple of the posts on here, and figured the proper course would be to replace the t-con board. I just finished replacing the tcon board and still the same thing. I called vizio about the problem and they say that if the screen lights up then the problem wouldn't be the backlight inverter boards, that it might be as simpl


Its the main board... ... Vizio VX37L Television

I have samsung Le32r87bdx/xeu it just turn on for 2 second then goes off, i have had inverter board replaced , but the problem still. do you know what could be the problem? cheers


... Flat Panel Televisions

Hello. I have a LG 47lg50-ua that when turned on, the right half of the screen goes white. The left half still plays fine. The warrenty had just expired so. I took the back of the tv off and looked around. I noticed that the top left ribbon cable (looking at the TV from the back) attached to the T-Con board (a CMO 35-D020223) had puffed up a bit. I took the bad ribbon cable out and put the good ribbon cable on the bad side. After the TV was turned on, the right side of the TV stayed white and wo


If you changed the Ribbon cable and its still the same then the T-Con board would of probably gone faulty. Lots of weird screen problems can be accounted for the T-con board. ... Flat Panel Televisions

I have a Rca 26LA33RQ upon initial use screen backlights bright white slowly fadeing to black. I do not know that the speakers work because I have not connect cable to it. I feel as if this could be the T-Con board. Or a low voltage production on my inverter board. I can find almost no information on this unit I repair al types of electronics being Navy trained leads me to try and find a publication to use but for this unit there is none. I am not even sure where the t con is on this one. There


... Flat Panel Televisions

Blank Screen When I turn on the tv, it looks like the backlight is going to stay on, but it shuts off. There is sound to the television still, and it looks like there is a faint outline of what is supposed to be displayed on the screen. I heard something about the inverter board, but is it the board or the lamp itself?


... Samsung LN32A550 32 in. LCD TV

Hp pl5060n I have a 50 HP plasma tv PL5060N when I turn it on the screen flashes black with white spots, fuzzy white with colors in it, red fuzzy blob and the goes totally black. The power led stays solid blue like its on. What do you think could be the problem


It sounds like a panel fault. Anyway, check this link. It has details with illustrations to Plasma display panels. Check them to that of your TVs, and make sure. ... Flat Panel Televisions

Hi, can you help me with this TV please. Hi, I have a Olevia 232-T11 LCD TV. First my TV wouldn't turn and the blue light just stayed on. I replaced the power supply board and now my TV turns on and the screen lights up but I get no picture or sound. The slave backlight inverter board has a blue light when you turn the TV on but goes away shortly after. The screen stays on but I have no sound or can't control the channel, volume or source button. Please help.


If the tv is not coming on but there is no picture or sound then it is a 100% guarantee that its a problem with the audio/video main board of the tv. I am sure that replacing the same would resolve the problem. Please get me the part number that is p ... Flat Panel Televisions

Led24a45rq hi, i have this rca led24a45rq that won't power on redb led light constant on, i have 12v coming from power supply to the main signal board could it still be power supply problem or main signal board tell me what you think it could be. or could it also be the back light inverter


... RCA LED24A45RQ 24 Class LED HDTV - 1080p, 1920 x 1080, 16:9, 800:1 Dyn

Okay so I bought the Samsung LN46C750 3D LCD TV today .. and when I hooked everything up and turned it on ... it would stay on for maybe 5 minutes then turn off again. It will not stay on for more than 5 minutes .... right before it turns off there is a noticable refresh rate drop (visible flickering ) and the backlight goes 10 shades darker before it turns off .... but that's not it !! I can still hear the speakers !! the sound is still playing. If someone could please tell me what this is I w


Hi,\015\012Try check your setting up for picture stup first.\015\012I think that from eco solutions setup. Or reset all the picture option to default setup by clicking reset on menu picture option. ... Samsung LN46C750 46 in 3D LCD TV

My toshiba tv 40bv700b keeps flashing white stand by light ive replaced power board backlight board and the one with the av jacks and it still flashing any help pls its driving me nuts


Replace the mainboard. ... Toshiba 40BV700B 40 INCH Full HD Black LCD TV Refurbished Mfr P

I have a Samsung LN40 b500 P3F. When I turn on the TV, the backlight flashes three times then goes dim. I know the TV still has a picture cause when I hold a flashlight to it I can still see the picture. I checked the connector on the powersupply that connects to main board and all voltages are there. I will load a video later. please. tell me what to check next.


... Samsung LN40B500 40 40" HDTV LCD TV

My LTV-32w6 westinghouse powers on & has sound but displays black screen with very faint colored vertical lines. It shows like this for about 1min before it goes into standby mode & the blue power indicator light turns yellow. Ive alread bought & replaced the inverter board. Still doing samething. Suggestions anyone please?


Depends on what is causing it...Vertical bands of faint black are generally caused by filtering capacitors and can be found in the power supply or the 5 volt supply or even the Video processing circuit...it is not an easy task to ... Westinghouse Flat Panel Televisions

I have an Acer AL2416W monitor which is playing up. When switched on it gets very bright after around 20sec and develops bright vertical lines. The images is frozen and the whole monitor goes dark (but backlight still on) within a minute. Seems like the t-con board? Has been serviced before with the same problem, but am not keen to put too much money in again. Likely to be the t-con, how much is it and where do I get it?


... Acer AL2416W 24 in. LCD Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1176 seconds