Having problems with your Standard (CRT) Televisions ?

My Durabrand dwt1304 was hooked up to cable. I now have relocated the TV into my workshop and am attempting to hook it up to a digital converter and an antenna. Turning the TV on, I am getting a "Helpful Hints" message on the screen that asks if I have performed an "AUTO PRESET CH". I found this on the remote's menu and ran it, after which the screen gets the message, "NO TV SIGNALS". At that point, I can get the TV to do nothing else. Trying to run through setup with the digital converter



Answers :

I suggest to go back to the menu and make sure in the connection or signal type to select antenna.. Since you had it hooked up to cable it may not have been selected to go back to antenna. Hope this helps you out.

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My Durabrand dwt1304 was hooked up to cable. I now have relocated the TV into my workshop and am attempting to hook it up to a digital converter and an antenna. Turning the TV on, I am getting a "Helpful Hints" message on the screen that asks if I have performed an "AUTO PRESET CH". I found this on the remote's menu and ran it, after which the screen gets the message, "NO TV SIGNALS". At that point, I can get the TV to do nothing else. Trying to run through setup with the digital converter


I suggest to go back to the menu and make sure in the connection or signal type to select antenna.. Since you had it hooked up to cable it may not have been selected to go back to antenna. Hope this helps you out. ... Durabrand DWT1304 13" TV

Philips 42pfl5522 LCD TV. Digital channels no longer work, when i select the digital channels with the remote either with the Digital MENU button or the EPG button I just get a small blue cross appearing in a box in the top left of the screen. Using the A/D button or the AV selection button simply takes me to a blue screen. It's the first time the TV has been used for a few months (having been to Australia for a while) but it did work when we got back for about a day. I'm not sure if


... Flat Panel Televisions

I just connected my DS converter box to my VCR and digital TV. I get "NO SIGNAL" and the antenna is connected correctly. I can't even get to the menu set up with the remote. How do I get the converter box to work?


... Projection Televisions

Picture I was litening to music threw direct box,vacumming,different outlet then tv. turned it off,& used converter box buttons to change channel. got no pic no sound. pushed more buttons,turned it off, then on hit reset, pulled card out put it back,then turned around to get remote, and saw my 82 yr. old dad holding remote as far out as he could,as if he was trying to get around me! I asked him what button he pushed & he said none. now we have sound no pic. it turns on deep blue screen no menu


I assumes that there is a confused memory IC inside, due to improper data inputs. Try a hard reset to this set. Unplug it from AC mains wall socket, and re-plug it back after 10 minutes of so. This must make it a hard reset. If it do not help you ... Samsung 50 in. Plasma TV

Phillips magnavox dtv digital to analog converter dynex flat screen tv and a rca universal remote what codes are the dynex tv and the phillips magnavox dtv digital to analog converter


... Philips Magnavox Rf Modulator Video Converter - Pm61138

I have a Sylvania 32 " Digital/Analog Flat screen TV Model LC320SL8 My cable provider now requires that I install a digital converter, set the TV to chanel 4, and program the remote that they provided with the converter to turn the TV on and off. What is the 3 digit code for this TV?


... Sylvania LC320SL8 Television

The picture mode on my tv is stuck to wide. When I try accessing this feature through the remote's "p-mode" or "p-size" buttons it gives me an message on the screen that says "not available." I've also tried accessing this feature through the menu on the remote and on the side of the tv but I still keep getting this same error message. I tried reading through the manuel, but there is nothing under the troubleshooting area that helps or addresses this issue. Is there a way to reset the tv t


If it says "not available" then you have to try the settings of the input source such as a cable box or something. Chnage the aspect ratio to 16:9 . If you can get me the model number of the box I will see if I can get your precise instructions. ... Flat Panel Televisions

I keep getting a massage on my screen that says the set-top's hdmi port requires an hdcp compatible tv input.I brought a 80 dollar hdmi cable and I get the massage so then found the hdmi cable that came with the tv so I used that one and still get the same message


... Flat Panel Televisions

I have Samsug LN-S2651D TV. Recently the screen turned green (no picture). Sound works fine. Cable remote will cycle through channel changes OK. Cable 'TIVO' appears to work OK. TV Menu's seem to work OK. Picture menu: Mode=Custom; Size=19:9; Digital NR=On; DNle Demo=Off; Film Mode=Off; Blue Screen=Off. How can I get the picture back?


... Samsung LN-S2651D 26 in. LCD Television

I have a dion set top box DTR250SS10 which when 1st installed worked fine. We have now lost all digital channels and when you go to retune it you get the message no signal and no carrier found. When you unplug it and put the ariel straight into the TV all the digital channels are there so we do have a signal


I have same problem did you get a fix? ... Projection Televisions

My Samsung plasma tv remote is locked. A message comes across the screen saying, locked. When I push the on/off button on the tv, I get the locked message also. The model # is PN43E440A2FXZA


My tv went black. What should I do? ... Flat Panel Televisions

How do I get rid of rectangle M TV 3 Stereo AV1 when I don't have the remote and am using a cable digital converter box as a tuner


... Gateway GTW-P42M303 42 in. Plasma Television

Input has me locked out everytime I turn off my Mitsubishi projection screen tv. Qv 9 works until tv gets turned off how do I fix this and my remote sometimes works sometimes doesn't. I have digital box and 4 outlet junction box hooked up.


I need a model number here to attempt to answer this question. ... Mitsubishi Projection Televisions

Our 47LG55 flat screen TV just started flashing rapidly on and off with a gray box with the message " this function is not available" . We can't get rid of it . Is it the problem of remote controllr or the problem with the TV sensor? Will the Compressed Air or WD-40 method help? If yes, what's the exact procedure? Thanks dozen in advance for any advice and help!


... Flat Panel Televisions

I have a 22ls4dLG tv and i am unable to retune the channels after the switch over to digital all i get is a on screen message saying not programmed how can i retune in autotune


... Sony FD Trinitron WEGA KV-36FS120 36" TV

Trying to watch laptop through TV screen but when I connect cable and choose pc button on remote, I get a message 'out of range'. This cable works ok on another small tv so assume the cable is not the problem.


You will have to go into your computer video card's control panel, and configure both the dual screen mode and the resolution of each screen.\015\012\015\012Some screens get crazy when the resolution doesn't fit properly, so try changing resol ... Flat Panel Televisions

My Vizio 32" lcd is hung with message "there is no device connected to tv" and the remote will not work so I can push "exit" button shown on screen. Any way to get out of this?


... Vizio L32 32 in. LCD HDTV

We have a 47LG55 flat screen tv that just started flashing rapidly on and off with a gray box with the message ""this function is not available" We can't get rid of it. Is it problem of the remote controller or the TV sensor? Thanks in advance for any advice or help!


... LG Flat Panel Televisions

I have a compaq w185q lcd monitor for pc.I have got a tv card with it so i can also watch tv with it.But today while watching tv on it i changed its input signal to something like 1600x..the screen suddenly black out with error message input signal out of range change to 1300 x..like this.and to change the setting i clicked menu from remote but menu doesnt appear so i couldnt reset it.it works fine when i switch to pc side but on tv side i get this error message.what to do please help!


... Flat Panel Televisions

I have an nice tel pm-rc4 universal remote that i would like to use on my admiral tv so i can get to the menu to put on the closed captions on the screen since i since become hearing depaired. i do not have the original remote for the television and there isn't a control panel on the tv to get to the menu screen. could you please help me get the code and instuctions to program the remote. thank u so much!!!!


... Flat Panel Televisions

Hi, I have a samsung dlp tv model #HLT5687sx, TV does not response with remote or button ,with the message on screen not available.


... Samsung LE Standard (CRT) Televisions

Analog white-westinghouse tv has blue screen and no sound. Connected to digital converter. screen does not change and after 5 minutes the tv shuts off


The glitches could have fried part of the tvs main chipi have had it happen to me a few times and or it was a fuse ... Standard (CRT) Televisions

How do i unlock the screen with no remote....trying to get signal from laptop to screen


Click here to download the user manual to your TV. It has all details. ... Sansui HDLCD-1900 19 in. LCD Television

I have a brand new Aquos 52" LED TV and I accidentally locked remote operation and THEN found out the front touch screen panel was broken. Any way to manually reset the TV or remote to gain access to on-screen menus? TV is literally bricked at the moment because I cannot use the front touch panel buttons and the remote simply displays a "remote control operation prohibited" alert on screen...


While the set is turned on, you need to hold the power button until the set shuts off and the led in the middle of the bottom flashes once. Then quickly release the power button and press the vol - and input buttons together ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

Put up a digital HD antenna outside on a 20 " ft pole. Used it on an older TV with the assistance of a SDTV Digital to Analog converter box. Recieved upwards of 30 channels very clear. Decided to hook the same antenna minus the converter box assuming this 2 year old HD LCD Flat Screen is Digital ready and have no need to convert anything to analog. I hooked the antenna lead into the ANT 1 (air) IN connection. Activated the Auto Program and it indicates that it searched for all available cha


Hello\015\012Although your Samsung has HDTV comailant tuner inside, it must get sufficiant signas strength to memorize all the HDTV channels. Normally HDTV signals are weak compare to analogue transnsmission signals, and contain more details. ... Samsung LN-T4061F 40 in. LCD HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3794 seconds