Suggested Questions/Answers :
It is recommended you read all this kind of situations
The remote wont and doesnt turn the tv on, go to turn on using the controls on the tv and read light flashes, informing that Child lock is on. Have tried the Menu botton on the remote many times with no luck !!!
Hello Ben,\015\012\015\012Please can you let me know the model number of the TV. The method for deactivating the child-lock varies on different models. I know on some, you need to use the MENU button on the front of the TV (not the ...
Daewoo Standard (CRT) Televisions
Verizon FiOS Motorola DVR freezes on menu (not the tv itself) and when turned off and on, will not turn on.
When on the menu and trying to play a recording, suddenly froze. The remote is not out of battery, and the DVR itself reacts to the remote. Turned off the DVR, ONLY menu remained for a minute, before doing blank. DVR will respond to remote/buttons but will NOT turn on.
(On a side note, the time displayed 9:30, the : is not visible at all)
Flat Panel Televisions
Menu controls I have a 22" Luxor 22-860-cob television. Recently when I turned my Xbox on, the screen displayed in black and white. I have had this issue before and managed to deal with it by changing the PAL settings in the TV menu.
However since then I have broken the Luxor remote and I am using a top up tv remote instead. When I am trying to change the PAL settings this time, I can access the menu but cannot scroll through it or change the settings.
Is there a way I can control the menu using
Can please help ive a 32 luxor tv which has lost vol and need reseting to get vol working but not got pin number ...
Flat Panel Televisions
Philips 26pfl5522d/05 turn the tv on, blue screen once warmed up and DIGITAL TV the only menu option that works from the remote is the volume bar. Cannot Factory Reset as cannot access menu. Turned on tried once on holding and releasing MENU (on TV control panel button) nothing. Cannot select HDMI source (cross in grey square displayed), the tv has locked me out!! Please Help
Flat Panel Televisions
I have a 42in. Olivia flat screen tv but it doesn't want to turn on. I tried with the remote many times, sometimes it works and sometimes not, I tries pressing the button directly on the tv,still
Olevia LT42HVi 42 in. LCD Television
I have a Gateway p46m103 flat screen television that will only turn on after plugging and unplugging the power cord many times. It would eventually turn on each time I tried this. Now, however, the green power light comes on, and I can hear it is on, but the screen is all black. I even tried pressing the Input button on the front of the television, to see if I had accidentally changed it, and even the icon on the screen will not show, to see if I am seeing the cable box, or the dvd player, etc.
Gateway PLSM46TV 46 in. Television
Magnavox Rear Projection TV model 55P8288A chasis PTV910. I have a hard time turning the TV on. The power button ligh lights up indicating that the TV is on but no video. After many, many, many tries it finally turns on. Is very frustrating. So I often leave it turned on. I do notice the power button light blinks once before it shuts off.
We got a replacement remote control for our ECW TV/VCR. The previous remote stopped working. We tried everything with it but no luck. Our hope was that the replacement remote would give us this function back again. Batteries are in....nothing happens.
Do we just return this remote ang try to get by with just manual controls. We have no menu so for recording we are stuck on SP. Where do we go from here.?
Emerson EWC1901 Combo
Picture I was litening to music threw direct box,vacumming,different outlet then tv. turned it off,& used converter box buttons to change channel. got no pic no sound. pushed more buttons,turned it off, then on hit reset, pulled card out put it back,then turned around to get remote, and saw my 82 yr. old dad holding remote as far out as he could,as if he was trying to get around me! I asked him what button he pushed & he said none. now we have sound no pic. it turns on deep blue screen no menu
I assumes that there is a confused memory IC inside, due to improper data inputs. Try a hard reset to this set. Unplug it from AC mains wall socket, and re-plug it back after 10 minutes of so. This must make it a hard reset. If it do not help you ...
Samsung 50 in. Plasma TV
TX-P42S11B Hi there my Panasonic TX-P42S11B has just turned it's self off!
The red light was still on as though it was on stand by. I tried turning it back on using the remote, it makes a hissing noise at the back of the tele then turns off.
I've unplugged it all for over 10 mins and tried again, this time using the button on the tele, the same thing happens.
The only thing I can tell you that might help is the red light is on and doing 5 flashes, then stops, then 5 flashes again!
I hope what I
Panasonic Standard (CRT) Televisions
I did not receive a remote control with my NS-LCD32. Problem is we cannot turn off closed captioning. I realize their is a menu I can access on the side of the TV, however there is no option to turn OFF closed captioning. I have option to change how closed captioning looks with the menu and I have tried to do that but it always just looks the same. I really just want to turn CC off completely. Also the HDMI ports don't work at all... but I think we may have to live with that. Thanks in
Well you have several options.\015\012\015\012You can order a new factory replacement remote control for your set as shown at the following link:\015\012\015\012 ...
Insignia IS-LCDTV32 32 in. Television
My Sharp Aquos LC-60LE847U lcd TV has some kind of controller issues. At times when we turn the set on using the remote, the indicator light will light but the TV never has sound or picture. It never "turns on". Then when you try to turn the power off, neither the remote nor the manual switch on the set does anything. If you fiddle with the power enough, the indicator light on the bottom bezel of the set will start flashing 3 blinks then one blink and keep repeating that. Unplugging the set
Sharp Aquos Flat Panel Televisions
I bought a 40 inch Westinghouse led TV. It keeps going back to set up mode. when I am watching something and I try to turn up the volume the TV goes back to set up mode (doest always happen... i would say every three times i do, it does) where I have to scroll down to "connect a game, Blu-Ray, DVD or other player then select my input". its very frustrating. I thought it might be a quirk in the remote so I tried getting a universal remote but it wont connect to the tv at all. I have tried severa
Westinghouse Flat Panel Televisions
I HAVE A 50' PHILIPS MODEL 50PFP5332D/37 FLAT SCREEN TV. I BLEW A BREAKER ON THE TV PLUG IN WITH A PORTABLE HEATER. TURNED BREAKER ON TV CAME ON WORKED FINE. TURNED OFF. 1HR. LATER A RED BLINKING LIGHT WAS BLINKING ON THE FRONT WHERE "BLUE" LITE IS IN "ON MODE" IT WAS BLINKING 5 TIMES THEN SHORT PAUSE, THEN BLINK 3 OR 4 TIMES IN RAPID SUCCESSION. I CHECKED ALL CONNECTIONS BOTH ELECTRICAL AND CABLE ALL TIGHT. SAME THING. I HAVE TRIED SEVERAL THINGS, BUT STILL BLINKS. THE REMOTE DOES NOTHING I CA
HI:\015\012 This is a plasma unit and philips plasma's are nortorious for bad power supplys, your problem may very well be the power suppy in the television, it is possible you blew a low B+ fuse on the power supply. There is also a issue with ...
Philips 50PFP5332D 50 in. Plasma Television
Just received a Haier Le22b13800 22 Inch TV as a gift. The screen either goes black and locks up or screen stays blue and set locks up. Then it doen't respond to remote or turning off at the power button on the set. The only way to turn it off to reset is to pull the power cord. Returned the first set and now he second on is doing the same thing. Run time on set less than an hour. Help???
Haier Le22b13800 22 Inch 1080p Led Hdtv, Black
The TV will turn on from remote many times and then won't turn on at all from the remote or directly from the TV itself so we end up unplugging the power which seems to reset the TV and then it
Having to unplug suggests a issue where the set is getting confused, if using any kind of box for signal or have a receiver in line remove power from all and after several minutes plug back. ...
Vizio VS420LF1A TV
Viewsonic N2635w says menu locked. Have tried holding down channel down key for over 5 seconds. Nothing happened. Whatever button I press on the remote it says menu lock. Please help me.
ViewSonic N2635w 26 in. LCD Television
When on button is pressed on the tv remote tv may or may not turn on, but it can be turned on manually with on/off button. Even tried a new remote, with no luck. Any idea? Thanks.
It may have bad IR receiver board located on the front of the TV, or worst case will be the main board that is not processing the signals from the IR receiver properly, so far I cannot locate the repalcement IR receiver for your TV yet. You may have ...
Sony Bravia KDL-26L5000 26 in. LCD HDTV
TV staying on one channel only. Tried info, menu, mute power off. When it turned back on it showed the menu and option to reset, as per advice i have read on here. However the select / ok button on the remote does not seem to select the option, from what i read it is then supposed to switch itself off, when turned back on, it should then allow me to plug and play and start from the beginning as i did when it was first purchased. But it does not? :0( any advise welcome. Thanks in advance
Try to enter auto scan.. ...
Flat Panel Televisions
How to open service mode on my BPL TV? I tried 2 things below: 1. Press volume + button on TV and menu button on remote simultaneously. 2. I pressed one time recall button and 3 time mute button on remote. Both didn't work. Please suggest
Standard (CRT) Televisions
Justght rcrn03br universal remote to operate my rca model 46la45rq lcd t.v. The code list came with i tried every code and tried brand search and auto program. All i can do is turn on my tv and change channel and turn up the volume. But can not use the menu key or pip or input buttons is there a easy way to get the code for my specific tv thanks.
Flat Panel Televisions
I HAVE A TOSHIBA TELEVISION MODEL NUMBER 27A42 AND I DON'T HAVE THE ORIGINAL REMOTE. I NEED TO CHANGE THE INPUT SO I CAN CONNECT MY DVD OR MY PC TO THE TV. I HAVE A RCA UNIVERSAL REMOTE BUT WHEN I TRY TO ACCESS THE TV MENU IT ONLY STAYS ON FOR A VERY SHORT TIME AND I STILL CAN'T ACCESS MOST OF THE FEATURES OF THE MENU. PLEASE HELP.
Toshiba 27A34 27" TV
My Pace TDC770d is turning on, then off over and over again, roughly 8 times per minute. When it's on, it shows a blue screen and says "loading.... bla bla bla..." then turns off immediately. I've tried unplugging the power to the box for 30 seconds at a time with no luck. This happens a lot. I think it's possessed. I need a priest or something.
Flat Panel Televisions
T.V. all of a sudden started changing inputs all by itself. I was watching it one day and the menu screen popped up and started scrolling through input options then selecting one at random and changing. I never touched the remote!!! I tried turning it off and turning it back on and i still happened. I took the batteries out of the remote and it still happened. I even unplugged the tv for a while and plugged it back in and still doing the same thing. It happens every couple of minutes, any adive?
The only thing you can do is replace the Main Board, which will be about 1/2 of what you paid for the set. I don't recommend it. ...
Insignia NS-LCD22-09 LCD HDTV
How to open service mode on my BPL TV? I tried 2 things below:
1. Press volume + button on TV and menu button on remote simultaneously.
2. I pressed one time recall button and 3 time mute button on remote.
Both didn't work.
Hitachi C25-RF35S 25" TV