Having problems with your Flat Panel Televisions ?

I bought a LC DVD 199A in November for a Christmas present. Until today, I have not tried to used the DVD player because I haven't really had a chance. I put the source mode to DVD but the DVD won't load, I did press lightly, the DVD went in only part way and I removed it. Why won't it load? Also, it goes from DVD mode to TV mode in a matter of seconds which is frustrating as well. What can I do. Of course it is out of warranty. Help? Patty



Answers :

The DVD player has a problem with the loading mechanism. Probably something has dropped inside it such as a coin or something else. It is really a simple problem. The reason why it would switch back to TV is because it is getting stucked. Get a flashlight and see if it has foriegn ofbect inside the slot. If you can remove it somehow it is the best way to fix it. I don't recommend opening the device.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I bought a LC DVD 199A in November for a Christmas present. Until today, I have not tried to used the DVD player because I haven't really had a chance. I put the source mode to DVD but the DVD won't load, I did press lightly, the DVD went in only part way and I removed it. Why won't it load? Also, it goes from DVD mode to TV mode in a matter of seconds which is frustrating as well. What can I do. Of course it is out of warranty. Help? Patty


The DVD player has a problem with the loading mechanism. Probably something has dropped inside it such as a coin or something else. It is really a simple problem. The reason why it would switch back to TV is because it is getting stucked. Get a flash ... Curtis Flat Panel Televisions

I have a insignia 26inch lcd flat screen tvmodel number ns-ltdvd26-09 dvd combo and i turn it on with no other hookups just power cord ..and it powers up goes to blue dvd screen if i dont touch it it will stay on 20 60 seconds then powes off it does it every time ..and some times wont even come on ...and for the few seconds it does the screen is white with fat lines in it ...i look for a blinking diognostics light but have never seen it blink when tv is on stand bye the power light dont blink ..


... Insignia LCDTV26 26 in. Television

Magnavox 32mf338b/f7 TV is stuck on standby mode, wont turn on (green light blinks, then goes back to red)


... Flat Panel Televisions

Hisense tv i have a hisense lcd tv with built in dvd player, the stand by light comes on and when the on botton is pressed the blue indication light comes on, the hisense logo comes on the screen for bout 3 seconds then the screen flash's abit brighter and goes dark. if left on for awhile the blue light flickers and the on/off botton does nothing. any ideas what it might be and where i can get parts.


The problem with these poorly made (in my view) sets is they are made in China and the company there has gone out of business by my count 2 times---they make poor sets for export and no parts or service literature so when you replace it consider anot ... Hisense LHDN32V66AUS 32 in. LCD TV

TV WONT SWITCH ON LE26A456C2D standby light blinks 5 times, 1 long, 4 short then goes out and tv wont come out of standby. You then have to remove the power. PSU capacitors do not show obvious signs of failure. Are these obvious signs of PSU failure or could it be the main board


Please read my giude then you may understand more as to what it takes to make the TV functions.\015\012Basic LCD monitor and TV troubleshooting guide:\015\012 ... Samsung Flat Panel Televisions

I bought a 40 inch Westinghouse led TV. It keeps going back to set up mode. when I am watching something and I try to turn up the volume the TV goes back to set up mode (doest always happen... i would say every three times i do, it does) where I have to scroll down to "connect a game, Blu-Ray, DVD or other player then select my input". its very frustrating. I thought it might be a quirk in the remote so I tried getting a universal remote but it wont connect to the tv at all. I have tried severa


... Westinghouse Flat Panel Televisions

Hi, I have a kp53hs30 tv and a month ago, the image started "bouncing" up and down, both with the directv feed and with a dvd player. sometimes it bounces very fast and sometimes it goes all the way around like a vegas coin slot. It gets to the point where the top part of the image is seen at the bottom part of the screen, is there a quick fix for this? thanks!


I do not think there is an easy fix for this. The problem you have mentioned is associated with the V-hold circuits or the CRTs itself. So if you would like to try a component level repair then let me know and I will guide you ... Flat Panel Televisions

Sanyo model DP46848 wont power on. Green light comes on for 5 seconds then goes out. What can I do to fix this and where do I get parts?


... Sanyo Flat Panel Televisions

Dual DRF2810 wont switch on I have a Dual TV, the standby light comes on for a few seconds then goes off and won't switch on. You suggested checking that the 'sleep' mode was not set but h


Click here and try to download the user manual to your device. If it is amde by Dual, the manual must be here. Download it and see whether you have done any wrong adjustment to it. ... Standard (CRT) Televisions

Sony LCD TV / PC Monitor MFM-HT75W manufactured 01/2006 On power up screen displays picture for 2/3 seconds then goes black/blank with power light on and sound transmission OK. Same if connected to PC or DVD player. Is problem backlight (CCFL ?) or invertor or PSU or other ? Other owners experienced same but looking for a solution .Please advise with details of spare parts and availability etc Many thanks


... Sony MFM-HT75W 17 in. HD-Ready LCD Television

Hitachi 55PMA550 I have a Hitachi 55PMA550 monitor linked to a skybox. The Hitachi goes on into standby mode on power up, I then use remote to start the Hitachi, the standby light goes green (start mode) & picture comes on in 3-4 seconds mormally. But now after 1 second (without picture) Hitachi goes back into standby mode of red light. I can hear sky tv sound (Hitachi linked thru sky to sound) and checked all cable connections, they are ok. Any advice would be most appreciated, thanks.


... Hitachi 55PMA550 55 in. HD-Ready Plasma Television

My Sony LCD TV Model KDL-46VL150 will go to standby mode after watching for a while. When goes to standby mode, the red light will flash in six times interval, during the red light flashing, the TV cannot be turned on. After about 25 mins, the TV can be turned on again. But after watching a while, it will goes into stnadby mode again. whats wrong ? I have updated the software but it still doesnt work.


Hi,This isn't good. A 6 flash shut down means there is a problem with the backlights inside the panel.This TV was initially introduced in Oct 2009. If you might have bought the TV within last year or so, try to call Sony and check, if th ... Sony BRAVIA KDL-46S2000 46 in. LCD HDTV

Wont come out of standby its a sanyo ce32ld47 -b i had my xbox in it and my xbox is now broke with red ring but 2day my tv wont come out of standby and the xbox is not pluged in i press the power light the standby light goes off like its going to turn on but then goes back into standby


... Sanyo Standard (CRT) Televisions

Panasonic Plasma TC-P46C2 - 7 Blink Light Error Code, Is this a reliable way to troubleshoot the set?


... Panasonic TCP46C2 46 in Plasma TV

We have a Hitachi P50S601, Ser # V7L019070, plasma TV. Turned it on and the power indicator light goes from blue to a blinking red light (Stand By Mode). The TV is connected to DIRECTV and if you are fast enough with turning the system on, you will get a picture for about 2 - 3 seconds, then the screen goes black. The power indicator light will go from blue to blinking red. Thank you for the assist.


It have short in some board have to checked by some professional. ... Hitachi Flat Panel Televisions

Logik TV L32LW783 wont turn on. Blue light is solid, press standby and Blue light dims then goes off. Then goes back to solid. TV has to be left sometimes for 24 hours before will work again. Once tv goes into standby - this happens all over again


... Flat Panel Televisions

My lg plasma tv 50pq60d wont switch on ... standby lights goes off makes a click but nothing in minute or so it goes back to the red standby light ..


Set is in protective shutdown--best thing is to take to a shop and get an estimate. ... Flat Panel Televisions

I have the sony bravia KDF E50 A12U The tv went pop and wont work. On switching on the tv, the light stays green, then goes over to 3 red light flash then green. What is this and is it easily fixed?


\012 \012 \012\012\012 \012\012 \012 \012 \012 \012 ... Sony KDF-E50A12U 50" LCD HDTV

I have Hitachi Ultravision model 46UX25K I was watching in the morning then I shut it down properly by remote control, after few hours I try to turn it on, nothing , no picture just dark screen, I can hear light noise from the back of the TV going on and off within seconds but that's all, when I push the power TV button on my remote control I see the power light goes on and off but no picture. Upon removing the back there is a red LED on a circuit board in the back that also goes on and off when


... Projection Televisions

When you turn the Tv on it immediately goes into standby mode, when i try to take it off standby, the display light turns green, makes a strange sound and goes back into standby mode


... Goodmans 217NS TV

Gpx td3222 dvd stuck I've only had this TV/DVD player combo for about 2 months - the DVD is now 'stuck' and when the tv is in 'dvd' mode, it is saying 'no signal'. I can't find ANY pinholes or ways to manually eject the DVD and can't get the tv to recognize that there even IS a DVD in there......


... GPX Combination Televisions

I have a magnavox 26md350b which I never really use. I tried to turn it on today and the power light goes on for a second then the standby light and dvd light turn on. The tv does not power on and the two lights just stay on.... Does anyone know whats wrong with my tv?


... Magnavox 26MD350B/F7 26 in. LCD TV/DVD Combo

Have a lg 20ls7d 20 in.power problem .theres power to the tv.the red light in frontis in .i hit the power button on top green light comes on then blinks 5 times screen cums in or a second then goes off.so does the green light .but the power light in the front wont come back on unless i hit the power button on top again.like i was turning the unit off.any ideas?


... LG RE-20LA70 20 in. Analog TV LCD Television

I have a Haier HLC19K1 19" tv/ DVD combo that won't read the DVDs that I put in. It makes a scratchy noise and then says that there is no disc. The DVD is facing the correct way, btw. But I've tried putting in different DVDs, restarting my tv, blowing into the DVD part, switching the power sources, but nothing works. How can I get the DVDs to work?


... Haier HLC19K1 19 in. LCD TV

My panasonic flat panel tv with model no. TH-L32c20x has a power problem.. i push the manual button on tv side,the red light is on..then second is the remote power,the green light come and blinking 20 times,then turn to red light blinking slowly, the power not goes in, i unplug and plug again,try the same way its not working..


... Panasonic Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1484 seconds