Having problems with your Flat Panel Televisions ?

The red light stays on but the power button or remote will not turn on tv. I unplugged for over night amd plugged it about 12 hours later and the red light on bottom stays on but the tv will not tun on via remote or the manual power button. note it was a lighting storm yesterday dont know if that plays a factor



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

The red light stays on but the power button or remote will not turn on tv. I unplugged for over night amd plugged it about 12 hours later and the red light on bottom stays on but the tv will not tun on via remote or the manual power button. note it was a lighting storm yesterday dont know if that plays a factor


... AOC L32W861 32 in. LCD TV

I have a Magnavox 20MF251W/37 that when I plug it in it turns on to the standby mode (red power light). When I power it on with remote or by pressing power button it does turn on (blue power light). Shortly thereafter, I do see an image (snow at this point since I don't have it plugged to any video source). However, that image stays on the screen for only 1 second then disappears. The unit is staying on and is NOT going back into standby mode (power lights stays blue). I have replaced main


Hi tempcheck,\015\012\015\012Lot of brand have a common symptom when there's a malfunction in inverter board, it will automatically shuts down the unit. This is because there is a protection circuit designed connected from this board to the mai ... Philips Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

When I turn my TV on it will turn off by itself in about a minute and the red power light on the front of the TV will blink. The remote control nor the power button on the front of the TV will turn it back on. I have to unplug the TV for a few seconds and plug it back in to make it come on. It usually takes two or more of these unplug and plug back in sessions to get it to stay on. Some times it takes up to fifteen before it will stay on. Please help.


This is what 's happening: you give the command to start the tv so the power source is initiated and starts to deliver power to the rest of the components of the tv; one of these components has aged and it requires much more current than normal to st ... Toshiba TN55V71 55" Rear Projection Television

Samsung HCR4755W. Power light comes on but always stays red, sometimes blinks red. TV picture or sound does not come on. It even goes red on remote when you push TV source button.


... Samsung HC-R4755W 47" HDTV

I have a Sony Wega KDF-E55A20 rear projection LCD TV. The screen stays black when pressing the Power On button. When the Power on button is pressed, a GREEN blinking light (5th light in a row of 5) comes on and blinks about 58 times, along with an intermittent "popping static" noise. It then goes to a STEADY RED accompanied by the 2nd light in the row of 5, BLINKING RED. It continues like this until I unplug the power cord. It will do the same thing if I plug it back in an press the Power On but


It sounds that the SCL ' SDA signal path has some short. You must have thorough knowledge in electronics to follow. Checking I2C bus signals is a skilled work. If you wish to get more details, ... Sony KDF-E55A20

Hi I have a TH50PZ80U that is flashing two red lights when I plug it in. If i press the power button for 5 seconeds it will flash 10 times. When applying power the AC relays click, after pressing the power button the fans turn on and the optical audio port is red. It will stay 'on' for 3 seconds and then the relays will click on turn off. No red optical light. If I test the P25 connector pin 1 voltage it will go to 15 Volts for about a seconed and then 0. This is only achieved by plugg


I'm 100% confident that a D-board replacement will fix this issue. I've worked on 8 of these and a D-board replacement fixed the issue you are having now. I had all the same problems with them but it is all related to the D-board (from previous exper ... Flat Panel Televisions

This TV has a light bar on the front that is red when off and blue when on. When we attempt to power the TV on the light will momentarily light blue, then turn red and the TV won't power up. It varies how many times we have to hit the power button before it powers on and stays on. I suspect there is a bad "starter" or capacitor, but don't know how much needs to be replaced internally to repair this problem


... Audiovox FPE3706 37 in. HDTV LCD Television

Vpw 425 viewsonic, have owned this Plasma, for several years, has always operated fine. Today it won't turn on. Main power switch is on. Standby switch is red. When I push the standby power button, it changes from red to green, I hear a click, then within 2-3 seconds the standby light turns back to red. I removed the back panel and tried to start again, after several tries there is a red indicator light (inside the panel) labeled "main power" that comes on and stays on.


... ViewSonic VPW425 42 in. Plasma HDTV

I Have A .AWA MHDV2411-03 When I Turn On The Mains Power Switch On The Tv - To On . The Red Stanby Led Lights Up As Normal Then I'll Press The Power Button On The Remote The Standby Led Lights Changes From Red To Green As Normal And The Tv Works Fine.When I Switch The Tv Off From The Remote Or The Mains Switch The Tv Switches Off As Normal. Now When I Go To Turn It Back On Again The Green Led Is On All The Time And The Tv Wont Work . When I Leave The Tv Switched Off And Disconected For Sev


... Standard (CRT) Televisions

My loewe Concept L32 shows the red power light on and flickers when I try to turn on via the remote control.......ie the decoder is not starting up. any button I try with the remote the red light flickers but no response from the TV. I have just installed a Topfeild set top box to receive HD and that and the TV was working perfectly. I have tried disconnecting the Set top box and ussing the TV by itself also turned off the power at swich and tried again.all to no avail. Regards, Colin Sh


Http://elektrotanya.com/loewe_chassis_l2650_concept_l26_l32_basic_sm.pdf/download.html\015\012\015\012\015\012\ ... Loewe Concept L32 Platinum 32 in. LCD TV

My panasonic flat panel tv with model no. TH-L32c20x has a power problem.. i push the manual button on tv side,the red light is on..then second is the remote power,the green light come and blinking 20 times,then turn to red light blinking slowly, the power not goes in, i unplug and plug again,try the same way its not working..


... Panasonic Flat Panel Televisions

Panasonic cinema vision, model pt-47x54j, power light stays on, with no blinking, when pressing on power button on tv with no picture, sound or menu, then shuts off after 30 seconds. If I use remote to turn it on, power light on remote flashes 3 times


... Panasonic Projection Televisions

TV has power as red light on stripe comes on, I press the on button on the remote and the power in the TV makes the sound that its about to switch on then nothing happens, the light doesnt turn to blue. After approximately 30-60 seconds the red light appears again


Replace the power board. You can get the power board from www.tvcircuitboards.com they will aslo assist you with determining which one is the correct one for your model. ... LG 50PG6000 50 in. HD-Ready Plasma TV

I have a 42" LG flatscreen tv. The red light is shining in the bottom right hand corner and I put fresh batteries in the remote but the tv won't switch on. If I press the power button on the remote...nothing... if I press the power button on the TV.... nothing... Please help!!! Vaughan


... Projection Televisions

After a power outage, my 22 inch bush tv dvd combo won't come off standby, the red standby light comes on and stays on and the dvd starts spinning. When pressing the power button the screen stays black and no back light or anything comes on. This has happened before but it came back on after a couple of days. I have rang argos up and followed there instructions of unplugging , checking the batteries, I have done eveything. Will my tv work again?


... Flat Panel Televisions

I have Hitachi Ultravision model 46UX25K I was watching in the morning then I shut it down properly by remote control, after few hours I try to turn it on, nothing , no picture just dark screen, I can hear light noise from the back of the TV going on and off within seconds but that's all, when I push the power TV button on my remote control I see the power light goes on and off but no picture. Upon removing the back there is a red LED on a circuit board in the back that also goes on and off when


... Projection Televisions

WhaWe have a Panasonic Model TC-P42G25 TV. We were watch the evenings when all of a sudden the tv went out and the red power button was blinking. I thought I heard a snap but an not sure. I unplugged the tv for about 10 minutes plugged it in again, the light was out. When I used the remote to start it. The red light started blinking again. I also noticed that when i plugged it in I you could hear it what i would say energize the circuits. No response other than the blinking red light.


The blink code asked for by another expert would help--but if you heard a pop and the set is out commonly this is the POWER supply board in the set failing--not unusual.Individual parts are not sold for these sets and generally this will be a ... Panasonic TCP42G25 42 in. TV

My TZ50V61 powers down usually shortly after turning on.When this happen the red light in the power button flashes on and off.I then unplug and plug back in and it will work ok. I have to do this more than once sometimes. I also tap and push power button several times.Seems like it stays on then or is it that it has warmed up and is not powering down.What do you suggest????


... Toshiba TZ55V61 55" Rear Projection Television

Pressing the main power brings the red standby light on, but pressing the power button on the remote or TV doesn't turn it on.


... Pioneer SD-643HD5 64" Rear Projection Television

Hi i have an 50 inch LG 50PG20D it can be turned on but it has no picture and no back light . the red light comes on and it changes when pressed power button . It seams that i can use all functions with frame buttons and my remote ( green light flashing). Im not sure if it has sound is on ,you can hear some noise but not sure if its audio or just tv buzzing . Please help!


... Flat Panel Televisions

Red light blinks six times. When I hit power button green light stays on for a few seconds, turns off the on for a few more. Then goes back to pattern of red light blinking six times.


The kill switch is open ensure the lamp cover presses firmly on the kill switch when u close the lamp chamber door the red light will stop blinking and u can now turn the tv on ... Projection Televisions

I have a pioneer Pro 200 and have had it for a dozen years. I have an HD in my office and the picture is so good and bright on the Pioneer I just cannot bring myself to get rid of it. The TV blinks off ans the power dies although the standby light stays lit (red) If I turn the power off with the main power button and then turn it back on to standby the TV will work again for a while. Sometimnes it will go off again within a minute or so and sometimes it will stay on for an hour. Can you tel


Im going to guess that if you try turning it on, sometimes you hear a "click" and nothing then the problem persists over and over until it finally turns on? If so, it's a problem with the power that "jumpstarts" the screen. Worn out capacitors on o ... Pioneer PRO-200 60" Rear Projection Television

My tv...dynex model dx-46l150a11 ... was in a storm....the red light was blinking. i replaced the power board after some research on the internet. now the power light just stays on and nothing else ha


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 4.8263 seconds