Having problems with your Standard (CRT) Televisions ?

Aiwa-SX2150 no sound. Sound menu is not display. Technician asking original Remote control to solve the problem, which is not available. Suggest the solution.


\015 After displayed message "PLEASE WAIT" whole setting of TV set is changed. Option displayed were not seen before n TV screen.\012Sound menu is not showing, channels are reduced 210 to 99.\012Technician asking original remote for solving the problem BUT original remote is not available. Please solve my problem. thanks.\012Dinesh Prajapati\[email protected]\012919429059656\015

Answers :

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Aiwa-SX2150 no sound. Sound menu is not display. Technician asking original Remote control to solve the problem, which is not available. Suggest the solution.


... Aiwa Standard (CRT) Televisions

My Zenith tv/vcr combo turns on, sounds like the vcr is working on something and turns itself off seconds later. I've unplugged it, left it for several days and plugged it back in and the problem persist. I've looked through the manual online and there is no solution for this problem. Any suggestions?


... Zenith TVBR1322 13 in. Combo

I have BPL neptune FYR 21 ,screen picture shrinks to a thin line and sound and all other features are fine . how to solve this problem ? should i change the picture IC or any other solution for it ? p


... Standard (CRT) Televisions

I have BPL neptune FYR 21 ,screen picture shrinks to a thin line and sound and all other features are fine . how to solve this problem ? should i change the picture IC or any other solution for it ? p


Yes chang the picture what evr ... Flat Panel Televisions

I would like to ask that my 7 years-old SHARP LC-37A33M is having some issue which the problem is, when i turn it on either by remote or manually, it came on and picture came out, but after 3 blinks, it turn itself off, and i noticed that when the picture came out, the TV gives off a cricket-like sound at the back. Solution maybe?


It sounds like the back-light inverter board should be checked. This type of whistling sound will come from it, if the transformer on it is faulty. Three blinks of standby light too denotes it. If you wish to get more details about the faults and ... Flat Panel Televisions

My HP LC4276N TV is 27 months old. A few days ago, the sound just ceased working. Of course, I checked the settings to ensure that "mute" was not activated and that the setting for speakers was "on". I then also tried connecting auxiliary speakers, but to no avail. Could this have been caused by a blown fuse? A bad capacitor? Or is there another likely cause? I would love any detail on how to check any of these potential problems, or any suggestions for repair. (I have no experience in t


Hello\015\012You haven't specified anything about its picture condition. Anyway, picture is correct, and only sound has probelm I assumes and answers. If picture is OK and oly sthere is no sound at all, check the speakers first. You can chek ... HP Lc4276n 42 in. LCD Television

Sony LCD TV / PC Monitor MFM-HT75W manufactured 01/2006 On power up screen displays picture for 2/3 seconds then goes black/blank with power light on and sound transmission OK. Same if connected to PC or DVD player. Is problem backlight (CCFL ?) or invertor or PSU or other ? Other owners experienced same but looking for a solution .Please advise with details of spare parts and availability etc Many thanks


... Sony MFM-HT75W 17 in. HD-Ready LCD Television

Vertical line i own a toshiba tv when powering up only vertical line appearing on the screen, i try to rectify by doing some resoldering on the pcb and replacing the vertical ic ta8403k and several electrolytic capacitors but nothing change,the sound and channels are fine the dc supply for the ic is 25vdc and i think its normal,are their any solutions to rectify this problem on my tv set.i need suggestion thank you


Check the deflection yoke connection cable for any loose contact at its connection socket at main board side. Unplug the connector out from the socket, and re-plug it back for at least tow times. Check the solder terminals of all connections to hor ... Toshiba 32A43 32" TV

I have a Westinghouse 16h120S lcd tv. From the day I bought it, the sound volume has been too low, even when I set both the tv and the cable at maximum volume. The cable company sent a technician to my home and was unable to solve the problem. I called Westinghouse customer support and they were unable to solve it. It appears that this is ot a problem with the settings; rather, it is a problem with some defect in the hardware.


Simple test: connect to the tv an dvd player, of any kind, and see if the problem is the same. If it is then the problem is internal - the audio amplifier of the tv is either too weak or the speakers don't match to it. After reading several cus ... Westinghouse PT-16H120S 16 in. LCD TV

Cs-21Z57ML samsung TV some problem in this TV all the component it work normal,sound and tuning search system it work in normal condition but not display picture,I am try by changing the tuning system but not solve the problem.please how to solve this problem?


... Samsung Standard (CRT) Televisions

Cs-21Z57ML samsung TV some problem in this TV all the component it work normal,sound and tuning search system it work in normal condition but not display picture,I am try by changing the tuning system but not solve the problem.please how to solve this problem?


... Standard (CRT) Televisions

Sanyo 42inch flat screen Model#DP42840 power board ticking suggest how to solve problem


... Sanyo 42 in. LCD TV

SHARP MODEL NO.21V-W99 PROBLEM: NO SOUNDS CAN HEAR EVEN IF THE VOLUME ARE HIGH ENOUGH..PLEASE HELP ME TROUBLESHOOT THIS PROBLEM SO THAT I WOULD ALSO KNOW HOW TO SOLVE THIS KIND OF PROBLEM.


Hi Florendo,\012\012Check the supply voltage at pin# 2 of TDA7056 IC, if you havn't voltage, trace it, the fusible resistor might be open. Replaced if open then power on the unit. If the fusible resistor burned again, this is an indication that ... Sharp Flat Panel Televisions

I have a Vizio P50 HDTV20A, this TV is 2 years old this month. TV will not turn on in the morning after being off for hours. The green power light comes on and you can hear a sound like the TV is turning on but the screen in black, no picture, no sound. I ususally can get the TV to come back on after unplugging it 20 times but when it does turn on it makes a static sound, I see a quick flash of a grey screen and then the TV works. Any suggestions to what might be the problem?


... Vizio P50HDTV10A 50 in. Plasma HDTV

BPL portable colour tv sound not decreasing i hv already changed memory ic but problem not solved.pls suggest me.


... Portable Televisions

Sony KDF-50E3000. Problem: when powering up, green lights blinks almost a hundred times, then has steady green light but no picture or sound. I just replaced the bulb w/ OEM Phillips replacement, still same problem. Any solution?


... Projection Televisions

I have Sansui Font S 2620 YM 26" LCD TV , Problem is that After 4 to 5 minutes of starting it , it's display start to flickering and in the same time a sound of sparking is coming from power supply of it. so please give me suggestion what should i do to rectify this type of problem .


... Flat Panel Televisions

Our Haier 42HP25BAT Plasma TV made a loud pop sound and the picture went out but it has sound...will the replacement of the TV-5210-96 Digital Board solve the problem?


The TV need a thorugh check up, before doing any repair to it. Some repair works, can be done manually. It sounds that some electrolytic capacitor on the main power reguaator board has bursted out. Check the power regulator baord first. Digital b ... Haier 55" Led 1080p 60hz - Haier

I am facing a problem in my lcd tv benq model no. vb3233, it is turning off in few minutes but red light is still on i am again open tv and it is again turn off in few minutes what can i suggest better option to solve my problem


... Toshiba Flat Panel Televisions

I have an acoustic solution 32 inch HD TV. model number is LCD32805HD. power supply: AC 220-240V ~ 50Hz max:180W. The problem I'm having is. When I plug it in. The blue stand by light comes on, all appears fine. But then I go to start the tv up, it sounds like its booting up, but then I start to hear a clicking sound, the screen flashes to what appears to be a snowy screen. Then goes back to stand by. This all happens in the space of aprx 10 seconds. I have done some research and it looks like t


... Flat Panel Televisions

My tv model sony trinitron KV2192M3 suddenly turned off and remained with a hissing sound.I then replaced FBT and the problem seems to be solved but after one month same problem occured, this time it was not FBT but i noticed protection fuse N25 from B+ and fusable resistor near fly back which is connected to 200v supply to G1 control grid is blown off. After replacing these fuses FBT tuned on but there was excessive brightness on the tv screen with sound ok and after little while tv turned off


Hello, First appreciate your work that you done yet, Secondly, According to the symptom please check the given two solutions:1- Check At FBT ABL resistance value .47ohm find and replace it.2- At C Board mounted on the ... Flat Panel Televisions

Will not power up manually or with remote. Re-set button only produces several clicking sounds and then a similar start up sound, but does not turn on. I'm pretty handy at fixing things and have already disassembled the split cabinet. I know others have experienced the same problem, but I have yet to see any solutions. I would much rather purchase the part needed and replace it myself. Look forward to your assistance, Thanks, Avery


The very first option is to check all your power supply capacitors. They are know as electrolytic capacitors and look like small cans with legs. You will need an ESR meter to find the bad capacitors. Nearly all repairs can be done on this level. Be s ... Flat Panel Televisions

I can't change the country option; the option is not available. The problem is that i even can't change my cable settings How can I solve this problem?


HelloI've send dome details about your TV by the email address you provided here. Check it and see whether it helps you. If not contact me. ... Samsung LE40B650T2 40 in. Full HD Crystal LCD TV

Since day one, my LG 50PG20 plasma has had audio sync problems. If I run audio to or through the tv, no matter what cable, it will get out of sync after awhile. Running the audio straight to my receiver has been how I have gotten by all these years. Is there any known firmware updates, or known issues with the audio board that would solve this problem? I would like to run all my audio out of the tv through the digital optical out to my receiver so I can have full digital sound for all my dev


... LG 50PG20 50 in. Plasma HDTV

The tv in question is 18 years old and always performed great consistently the same as the day it was purchased never any problems until 5 days ago the sound went on a "mute" mode we would appreciate finding a solution to thiis problem thanks much for your assistance.


You'll have to supply a make and model number for the TV please. The one thing to consider is that manufacturers normally only support their electronic goods for a period of 7-10 years at the very outside of the range. It may be difficult, even impos ... Philips Standard (CRT) Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1672 seconds